Your cart is empty.
Your cart is empty. The Type R232A is an Underwriters Laboratories (UL) listed regulator designed for LP-gas (propane) systems. The unit is designed to reduce the tank pressure to an Outlet pressure of 11 inches Water Column through an integral two-stage system. Designed for installations with small domestic loads. The units compact size makes it ideal for tight fit applications. The first-stage Screened drip-lip vent is oriented downward and the second-stage vent is oriented over the Outlet as standard.
!!! WARNING !!! Failure to follow these instructions or to properly install and maintain this equipment could result in an explosion and/or fire causing property damage and personal injury or death. Fisher equipment must be installed, operated and maintained in accordance with Federal, state and local codes and Fisher instructions. The installation in most States must also comply with NFPA no. 54 and 58 standards. Only Personnel trained in the proper procedures, codes, standards and regulations of the LP-gas industry should install and service this equipment.
BUYER AGREES THAT RESPONSIBILITY FOR PROPER SELECTION, INSTALLATION, USE AND MAINTENANCE OF ANY PRODUCT REMAINS SOLELY WITH THE PURCHASER AND END-USER. BUYER AGREES TO COMPLY WITH THE ABOVE WARNING AND ALL INSTRUCTION MANUALS, BULLETINS AND INSTALLATION GUIDES ASSOCIATED WITH THIS PRODUCT.
Client d'
Reviewed in Canada on February 16, 2025
Ok
michel parenteau
Reviewed in Canada on December 9, 2024
works the way it should
how0448
Reviewed in Canada on November 9, 2024
As advertised
Michael Couch
Reviewed in Canada on December 27, 2023
I use this to hook up a propane furnace in the shop. Works well and flows the rite WC for the furnace.
Recommended Products
