Shopping Cart

Your cart is empty.

Your cart is empty.

Orbit Irrigation Product Blu Tee 1/2'

4.6 (5) Write Review
Free shipping on orders over $29.99

$4.31

$ 2 .15 $2.15

In Stock

About this item

  • Connection Inlet: 1/2 in.
  • Material: Plastic
  • Color: Black/Blue


Blu-Lock fittings are a fast, long-lasting, environmentally friendly way to connect flexible polyethylene pipe from an irrigation valve to the heads or drip manifolds in each zone without solvents or clamps. Stainless steel teeth grip the pipe tightly and a special O-ring creates a watertight seal while still allowing for rotation of the fitting after insertion, and you can immediately pressurize the system with no wait time for joints to cure. Built-in removal for 1/2-in. and optional Blu-Lock removal tool for 3/4-in. and 1-in. facilitate easy removal and reuse of fittings. 3/4-in. and 1-in. Blu-Lock fittings are compatible with 100 PSI SIDR 15 and 80 PSI utility HDPE pipe. 1/2-in. Blu-Lock is a proprietary size that can be joined to existing swing pipe systems with 1/2-in. Blu-Lock x Spiral Barb fitting. Use 1-in. and 3/4-in. Blu-Lock with lateral lines to convey water to each zone and 1/2-in. Blu-Lock to provide a rotatable, adjustable “swing pipe” connection at each spray head, impact sprinkler, or gear-drive rotor. Blu-Lock is designed for non-constant pressure (valve-out) cold water outdoor irrigation only. Use PVC-Lock for constant pressure (valve-in) applications. Maximum recommended operating pressure is 100 PSI.


Alex
Reviewed in the United States on September 19, 2024
Works as should
holli
Reviewed in the United States on July 13, 2024
I ordered there before and they were great. This last time I was sent some that did not fit my 0.5 in hose.
Customer
Reviewed in the United States on December 4, 2024
sucked
Fraken
Reviewed in Canada on October 28, 2024
I have put in an underground sprinkler system and needed a few more of these
IMHO
Reviewed in the United States on October 27, 2024
I bought a selection of Orbit fittings for 1/2" irrigation PE tubing (0.7 in OD). All are labeled as 1/2 in fittings, but these "Bluelock" tee fittings are obviously smaller than the others and do not fit. Why you would make 2 different size fittings and call them both 1/2" is a mystery - you almost have to be trying to mess with your customers.Anyway, be warned. I didn't need to install these until after the return window, so I'm stuck with useless junk.