Your cart is empty.
Your cart is empty. This CB coax cable is used for CB ham radio, antenna analyzer, tuner, switch, monitor, dummy load and SWR meter, it is also great for Jeep Wrangler CB installation.
The 20ft/6m CB antenna cable has UHF PL-259 male to male plug, nickel-plated connectors which are fully molded.
Over 95% Coverage,the braid shield is made of 128x0.12mm aluminum wire which made this jumper cable is really low loss and maximum protect the signal during the transmission.
Better than RG58, RG8x coax cable has 17AWG thicker pure copper inner conductor, is a step up from standard RG-58 coaxial cable and is recommended for high-powered applications or users who simply want the best coax possible.
Valente Espinosa Islas
Reviewed in Mexico on September 19, 2024
Adecuado para una estación de radio aficionado en onda corta
Bill Langton
Reviewed in the United States on July 10, 2024
This is about the 5th or 6th piece of RFAdapter Coax (various lengths) I have purchased in the last few years. Each has been well constructed, durable, have nice, solid PL-259 connectors and have worked great for my Ham Radio HF applications. In shorter lengths, there is little loss at HF frequencies and I rarely utilize more than 50' in my portable operations.
Customer
Reviewed in Canada on March 20, 2024
Have ordered these a few times now and used on CB and Ham radio equipment. Really nice build quality and low SWR on 100ft runs.
Perry Penney
Reviewed in Canada on February 7, 2024
Thanks its what I need it
David Smith
Reviewed in the United States on November 9, 2024
Bought this for doing Parks On The Air (POTA) ham radio activations and it performed admirably. Very flexible, easy to roll up, both connections well soldered and had no adverse effect on my SWR. Great value for the price.
Vmac011
Reviewed in Australia on August 7, 2023
The value for money is undeniable. Just make sure that you polish the centre pin on PL259 with some fine sanding paper, as they may have burrs from soldering.
Elias Muñoz González
Reviewed in Mexico on December 24, 2023
Llego bien. Se ve bien ,pero aun no lo e probado,
Dean Sevold
Reviewed in Canada on June 5, 2022
Installed cable connectors to radio and antenna keeps line losses to a minimum and water out. Perfect length for my custom installation
Customer
Reviewed in Canada on May 11, 2022
correspond à ce que l`on a besoin, parfait
HistoryFan
Reviewed in Canada on April 4, 2022
I ordered the 50 foot length for my base station and homemade antenna. I was concerned by some of the reviews about quality but found my example to be well built. Soldering looked good etc. I hooked up the antenna this weekend for the first time. Had good SWR readings and made a contact in Europe right away (from Canada) on lower 38. I'm happy.
JStor
Reviewed in Canada on August 14, 2021
No surprises, used it for a 50 foot run to my antenna on 11m. Works great.
Gordon R.
Reviewed in Canada on October 14, 2021
Item was as advertised. It arrived quickly and was well packaged. I recommend it to others to purchase.
Mike
Reviewed in Canada on August 15, 2020
The coax was exactly 50 feet as ordered. PL259 connectors are ok but feel pretty cheap. The soldering to the center lead is pretty decent. I used this to replace the RG58 coax to my 10m dipole on-top of a 40 foot mast. With the RG58 my SWR would never go lower than 1:6 no matter how much i tried to adjust the antenna length. After replacing with this RG8X my SWR is now a nice 1:2 without any further adjustments.
Recommended Products
