Your cart is empty.
Your cart is empty.Product Description
Specifications:
- Inlet/Outlet Thread Size: 1/2 inch, 3/4inch, 1inch (Optional)
Rate of Flow Range:
- 1/2 inch: 0.29~0.81 M3/H, 0.7~0.95bar
- 3/4 inch: 0.65-2.42 M3/H, 0.7-9.5bar;
- 1 inch: 1.82~6.34 M3/H, 0.7-9.5bar
Suction Capacity:
- 1/2 inch: 3~37 L/H
- 3/4 inch: 9~92 L/H
- 1 inch: 34~279 L/H
The working principle of the jet:
- Under the high-speed rotation of the pump impeller, the liquid is ejected from the nozzle at a high speed. When the high-speed flowing liquid passes through the mixing chamber, a vacuum is formed in the mixing chamber. A large amount of air is sucked in through the air duct. The throat is mixed with the liquid vigorously to form a gas-liquid mixture, which is discharged by the diffuser. The air rises in the water as tiny bubbles, forming an efficient material transfer during the whole process. It can disinfect and purify sewage.
Description:
- When the fluid flows through the venturi tube, that will bring vacuum. The fluid caused the vacuum is recognized as moving fluid. For the irrigation injector, the moving fluid is the irrigation water. The vacuum produced by venturi tube imbibe fertilizer and chemical into moving water. Venturi tube is drived by water, namely they drive by the main irrigation tube pressure. Operating energy of these device can reduce the irrigation water load of water pipeline.
Features:
- Made of quality engineering POM plastic, good workmanship, sturdy and durable.
- With outstanding chemical resistance to most chemical. Efficient and compact differential pressure injector device.
- Economic and lower cost choice for you.
- Suitable for 1/2", 3/4" or 1" BSP inlet/outlet connector.
- Applicable for agriculture irrigation system fertilizer and chemical injection.
A
Reviewed in Canada on February 14, 2025
This thing is an amazing value, it can get up to 25inhg general vacuum on a full glassware set. if the pump is underpowered it might not perform well, if it seems to be not working, adjust the check valve and be careful opening it, it's a glass ball and spring, placing it back in afterwards made any problems with vacuum production (or air injection) disappear.
Dishwasher
Reviewed in Canada on December 6, 2024
This works great to siphon fertilizer into my water supply
Some random dude
Reviewed in Canada on December 12, 2024
Works really well with a 1/4" check valve on a 5gpm pump.
Kyle
Reviewed in Canada on May 28, 2023
Okay, let's talk about some of the negative reviews because this thing works great!The fella that couldn't get the fitting to stop leaking: It is Chinese. It doesn't have typical NPT pipe threadings unless it clearly says it does. These are straight BSPP (G) threads. And, Teflon tape isn't for sealing a pipe thread; that's a myth, and it doesn't work. Teflon tape is a lubricant so you can tighten the pipe thread easier. You only ever really need one layer, and using multiple can keep the pipe threads from seating and cause a leak.To the folks with suction problems: This thing sucks hard (in a good way.) How hard it will suck depends entirely on how and where you install it. You cannot simply put it inline and expect it to work. The most suction you would ever get from it would be if you mounted it onto the end of a garden hose and let the outlet of the Venturi be your water nozzle. What you have to understand is that for a Venturi to work, there needs to be a difference in pressure on either side of the Venturi. More specifically, the inlet has to have more pressure than the outlet. The larger the difference in pressure, the more vacuum potential you have. The further you mount the Venturi from the outlet, or the more fittings and reductions you have between the Venturi's outlet and the ultimate outlet, the more your setup will reduce the difference in pressure. No difference in pressure no suction. There would be fluid escaping though the suction line if there wasn't a check valve in place (it comes with one, but it also screws off if you don't want it.)
None YourB
Reviewed in Canada on May 14, 2023
I tried connecting a garden hose to the input side... You have to block the output to get a suction. But once you have the suction, the flow rate (total output of water) is horrible... Wondering if we really have to install it in a parallel way to make it work properly?
Richard Metz
Reviewed in Canada on July 14, 2021
Product is difficult to initiate draw from drawSource
dirk, dirkgently
Reviewed in Canada on August 16, 2019
doesn't work with dribblers. needs high velocity
Recommended Products