Your cart is empty.
Your cart is empty. Product description
Features:
Adjustable brightness modes:
The 3-way touch sequence is LO-MED-HI-OFF, compatible with 3-way bulbs or 1-way bulbs, LED and incandescent lamps.
How to use:
The brown and blue wires are connected to the plug, and the blue and red wires are connected to the light source (the blue wire is connected to two sets of wires at the same time). The black wire is the touch wire, which is usually connected to the hardware plate.
Material:ABS shell
Rated voltage: 220V
Rated current: 1A
Three-stage dimming mode: LO-MED-HI-OFF
Size:
Line length: 4 inch
Shell: 1.9 x 1.2 x 0.6 inch
Package includes:
4 x 3 Stage dimming touch switches
12 x Wiring Caps
gauthier jean jacques
Reviewed in Canada on September 14, 2024
bien utile fonctionne bien
Vincent Dunn
Reviewed in the United States on June 26, 2024
The media could not be loaded.
Rafael Pieters
Reviewed in Canada on March 3, 2024
Product it's ok. Work as expected. The de wiring circuit here is wrong. Just switch black by white cable according to the diagram in the cover and work fine. Also the touch part (yellow wire) need to be isolated from the ground, otherwise will not work properly. Good price.
GH
Reviewed in the United States on March 24, 2024
Bad manual instruction . don’ t buy it
Bella Boo
Reviewed in Canada on December 4, 2024
I ordered these to upgrade some cabinet lighting around my home form halogen to LED.Concept is good, installation easy, but they do not play well with LED bulbs, especially the G8 style found in puck lights. They flicker like crazy and only provide 2 levels of lighting at best.Full on works fine, so I'll go with that, but honestly very disappointed.I DO NOT RECOMMEND THIS ITEM
A. L.
Reviewed in Canada on November 8, 2024
Installed one out of the four in the package. It works! Appear to have good built quality.
Rookman
Reviewed in the United States on October 22, 2024
I first went with the switch with the most ratings on Amazon at a price of 10$+ each. That switch was a piece of ****. These switches at @+-$2.50 each gave my old touch lamps new life again. Easy to install brown is hot, blue is neutral red goes to bulb and black goes on the metal rod on the inside of my lamp. Wiring diagram printed on switch is a nice touch.
Customer
Reviewed in Canada on April 24, 2024
Better that the last ones I purchased. These are so well built and work great. Fit nicely into the base of most lamps.
Dan D.
Reviewed in the United States on September 12, 2023
Used for Rexcraft U.S. Regulation bugle conversion as a lamp without modification for a physical switch. Lowest setting flickers very noticeably with incandescents and dimmable LED bulbs. Disappointing, but this design doesn't seem to be available yet, leaving no alternative.
Maialbe Electric
Reviewed in the United States on March 25, 2023
Fácil de instalar
Recommended Products
