Shopping Cart

Your cart is empty.

Your cart is empty.

#5 (4' - 8') Black Square Base EPDM Flexible Pipe Flashing Dektite Roof Jack Pipe Boot Pipe Flashing (DFE105B)

Free shipping on orders over CA $49.99

CA $69.00

CA $ 28 .99 CA $28.99

In Stock

About this item

  • Flashing Base is 12-1/4" x 12-1/4" - Pipe Boot Fits 4" to 8" Outside Pipe Diameter
  • Continuous Service Temperature Ranges of -58F to 239F (EPDM)
  • Slide Flashing Down Pipe and Fasten Aluminum Collar To Roof With Metal Roofing Screws Every 1-1/2"
  • If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack
  • 20 Year Manufacturer's Warranty Against Manufacturing Defects


#5 (DFE105B) BLACK Square Base EPDM Flexible Pipe Flashing
-Flashing Base is 12-1/4" x 12-1/4" - Pipe Boot Fits 4" to 8" Outside Pipe Diameter
-Continuous Service Temperature Ranges of -58F to 239F (EPDM)
-Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors
-EPDM Rubber Boot with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing
-Slide Flashing Down Pipe and Fasten Aluminum Collar To Roof With Metal Roofing Screws Every 1-1/2"
-If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack
-Reduces Building Maintenance Due To The Long Life of the Dektite Product
-Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents
-20 Year Manufacturer's Warranty Against Manufacturing Defects
Works with Metal Roof Pitches up to 12/12 (0 to 45 degrees)
On a Roof with a 10/12 to 12/12 Pitch (45 Degrees) Dektite Recommends You Use a Square Base Pipe Flashing Installed With The Base Tip Pointed Towards Roof Top. When Used With Deep Ribbed Profile Roofing Panels With 1-1/2" Deep Corrugation Or More, Consider Using Next Size Up That Will Accommodate The Same Diameter Pipe
CAUTION This product is not rated for temperatures experienced by prolonged contact with a single wall chimney. Manufacturers Recommended Temperature Ranges Are Clearly Stated Please Verify This Product Will Meet Specifications Of Your Installation Or Product Damage May Occur
For single wall chimney applications consider using a High Temperature Silicone Flashing product that is rated for high temperature applications.


Robert
Reviewed in the United States on March 25, 2023
Very easy to install. Easy to cut so it will fit the pipe you’re installing it over. Easy to form the base to fit the roof. All and all a great product. I ordered it Wednesday, got it Thursday, and installed it Friday.
Fintan Roche
Reviewed in the United Kingdom on January 1, 2021
Working well easy to use.
kurtz-detektei-hamburg.de
Reviewed in the United Kingdom on April 12, 2020
Not a beauty but does what it's supposed to do and I covered it anyway
Jamie
Reviewed in the United States on September 13, 2018
fast shipping, excellent quality and extremely bendable. I needed to fix a natural gas fireplace pipe vent that the last hoome owner cut into the peak of the roof. this boot fit perfectly over it on a sharp peak on both sides. I am impressed with it.
Michael J Nicholas
Reviewed in the United States on August 15, 2018
The fact this is written to be flashing for 8" chimney or pipes please be aware this is for the OD of the chimney. I had to really modify this flashing to work with my 8" chimney. Just be sure you get the outside diameter. The flashing itself is decent quality. If installing in the cold I recommend warming it up inside first. This is a good cheaper alternative to metal flashing. I have only had mine installed for 6-9 months but it is holding up so far.
Recommended Products

CA $96.26

CA $ 37 .99 CA $37.99

4.6
Select Option

CA $43.00

CA $ 22 .99 CA $22.99

4.6
Select Option

CA $29.12

CA $ 12 .99 CA $12.99

4.7
Select Option

CA $45.95

CA $ 22 .99 CA $22.99

4.3
Select Option

CA $82.41

CA $ 33 .99 CA $33.99

4.6
Select Option

CA $39.99

CA $ 18 .99 CA $18.99

4.6
Select Option