Your cart is empty.
Your cart is empty.Product Description
Warm tips:
- To let it work, you need to buy extra 12V power supply and ws2811 controller, which is not included in the package list.
- Please inject power if hook up multiple strings in case of voltage drop.
- What you will get:
- 1x 50pcs WS2811 LED pixels light
ALITOVE Full Color WS2811 12V LED pixel Lights ( Without power supply and controller)
Different from solid color string lights that only display the same color at the same time, we creatively embed an WS2811 IC to each LED chip. You can control each LED individually, so as to realize unlimited color, brightness and changing speed combination on one string light simultaneously and make colors flow or chase like a rainbow, more beautiful and vivid than dull RGB solid-color lights. It can be programmed by micro-controllers. Completely control each LED, DIY your own control mode.
- Total Length: 13ft (4 meters)
- Light Source: F8 RGB with built-in WS2811 IC
- LED Qty: 50LEDs per strand
- Working voltage: DC 12V
- Power: 0.6W per LED, 30W in total
- Bulb spacing: 3.2 inch (8cm)
- Drill hole diameter:12mm
Application Cases
Customer
Reviewed in Canada on March 7, 2025
Great quality. This was an alternate for another product previously purchased. We like them better.
clalac
Reviewed in Canada on March 17, 2025
nice quality and good price
Raphael B.
Reviewed in Canada on February 3, 2025
perfect
S. Hamilton
Reviewed in Canada on January 10, 2025
Nicely made pixels
User1442
Reviewed in Canada on April 9, 2025
Purchased a bunch of these and they all work fine. One of the bags was already opened and taped closed. Another bag had an off coloured strand.
Florian Kauffmann
Reviewed in Germany on October 30, 2024
Habe 3 Stück davon zusammen mit einem ESP8266 und Wled am Tannenbaum und es sieht mega aus. Die LEDs reagieren sofort und sind mehr als hell genug.
Jim Zelling
Reviewed in Canada on December 2, 2023
These lights work great but you should get the pliers to install with as they are hard on fingers installing into channel
Curtis D
Reviewed in Canada on November 9, 2023
The media could not be loaded.
Dean Styles
Reviewed in Canada on October 17, 2023
Bought the 10 pack in 2022 and just bought another 10 pack for 2023. Perfect spacing for stringing along the house gutters and I used the old incandescent clips to hold the LEDs in place.I rated "Brightness" at 4 but there is a tradeoff between power and brightness. As it is you can only chain two strings before the LEDs on the end of the 2nd string start to dim (at full power - all white). Get yourself a spool of Amazon Basics 100ft 16-Gauge Audio Stereo Speaker Wire Cable ( B006LW0W5Y ) and cut it into 16 foot segments to run in parallel with the LED string. This provides power injection for each segment. I have a 9 string chain (140 feet) that measures 4.5V (all white load) on the far end. The Amazon Basics is copper clad aluminum (lighter) but it solders perfectly (I don't trust crimps in weather) and I put "bullet" connectors on the Y at the far end of each LED string to tie into the chain of Basics cables. Makes it easy to add the next string on to the chain.
Jos van Heesch
Reviewed in the Netherlands on October 10, 2023
De helft is al kapot
Renzo Murari
Reviewed in Italy on April 3, 2022
The media could not be loaded.
Tim
Reviewed in the United Kingdom on December 16, 2020
Set up with WLED on a NodeMCU and everything worked perfectly.
Matt M
Reviewed in the United States on March 17, 2019
I have a 5 meter Alitove RGB strip that my wife commandeered for our last holiday party to light up our outdoor bar. It wasn’t the best for the task because the strip is flat and doesn’t turn corners well. I bought one of these to check out and will be buying more.I’m using one of Alitove’s $11 RF controllers to drive the strip because I don’t really care about programming a micro controller with a bunch of patterns and their controller has a lot of variations - plus our guests found them really cool and trippy, so that’s always a plus. While testing the new strand in my lab I did note that the 5-Volt strand peaked at 2.77 Amps with all LEDS set to white and full brightness. As someone else mentioned you will need at least 3 Amps per strand to supply them.My lab supply is variable so I got to see that the strands stay reasonably bright down to about 3 volts, and either the LEDs or my controller stops changing the LEDS at about 2.33 Volts. Current draw with all LEDs set to white and full brightness at 3.3 Volts was 900 milliAmps.At 5 Volts I found the lights to be almost uncomfortably bright but this was sitting within 3 feet of them. Plenty bright for my taste.The power wire is I think a Metric gauge that is somewhere between 24 and 26 AWG. At least, that’s the way it fits in my Klein strippers. While some may complain about this, especially when wanting to run more than one strand, it is the cost of having a smaller wire bundle with a good deal of flexibility.The last point, and what almost cost them a star, is that like others my Red and Green channels are swapped. Not a big deal for my application but it will keep me from mixing and matching with other strips and panels.
Recommended Products