Your cart is empty.
Your cart is empty.Bar's Leaks Jack Oil With Stop Leak stops current leaks. Prevents future leaks. Renews worn jacks. Safe and easy to use.
hybridteas
Reviewed in Canada on February 27, 2025
Excellent
Réal J.
Reviewed in Canada on February 22, 2025
Only needs a little and it fixed my jack.Amazing results
Keith
Reviewed in the United States on February 14, 2025
Works well, exactly as as advertised
Stephen D.Customer
Reviewed in the United States on January 6, 2025
It’s a good product it did the job. I had a very slow surf seeping seal my jack and topped off the oil and I’ve seen no signs of any leak since very good product.
Customer
Reviewed in Canada on December 3, 2024
Seems to be the brand of choice for floor Jacks. No complaints , seems to work fine.
Ti- pot
Reviewed in Canada on December 28, 2024
Très bon produit je suis satisfait
DG
Reviewed in Canada on December 10, 2024
Didn’t work, Jack still leaks, would NOT recommend
Scooter 2
Reviewed in the United States on November 15, 2024
Great price and so far, works just fine.
Customer
Reviewed in the United Arab Emirates on January 20, 2024
Not fixing the jack problem still not working
michel sicotte
Reviewed in Canada on August 3, 2023
ok
Paco
Reviewed in the United States on March 16, 2023
The clutch master cylinder failed on my 2012 Ford Focus. It leaked internally, causing the pedal to sink to the floor without disengaging the clutch, but with no loss of brake fluid. The same reservoir is used on the Focus to hold fluid for the brakes and the clutch. Bars Leaks jack oil with stop leak must NOT be put into the brake system reservoir because it can affect the boiling point of brake fluid and the viscosity thereby causing problems with the ABS system. Also, it will not mix with brake fluid. My solution was to segregate the clutch hydraulics from the brake system. I purchased from Amazon a Lefossi universal reservoir for motorcycle brake systems. I mounted this reservoir on the side of the battery box. I also bought from Amazon some 150 cc plastic syringes for fluid transfer. I cut the fluid line from the brake master cylinder reservoir to the clutch master cylinder fluid intake nipple. I plugged the output nipple on the brake master cylinder reservoir. I ran a hose from the remaining section of the fluid supply line to the clutch master cylinder up to the Lefossi reservoir. I then vacuumed out the remaining residual brake fluid in the clutch system using a manual brake vacuum pump which can be purchased from Amazon, by connecting the vacuum pump to the clutch bleed nipple. After that, I used the syringe to pump the Bars Leak jack fluid into the clutch bleed nipple. This filled the clutch hydraulic system and automatically bled the system of all air. I pumped in just enough jack fluid to fill the Lefossi reservoir (this is called reverse injection). Then I closed the clutch bleed nipple. The result, it took about 15 hours or so for the Bars Leak jack oil to do its magic and then the clutch worked perfectly! Bars company claims you should allow up to 3 days for the oil to recondition the seals of a hydraulic jack or snow plow system. They also insist that there are no solvents in the product which can ultimately dissolve the seals. Bars company does not specifically recommend the jack oil for use in clutch systems, and they caution against putting this stuff into the brake fluid in the brake reservoir. It can ruin your brakes, but I got great results with my clutch system after I segregated the brake hydraulics from the clutch hydraulics, and I saved almost $500!
D RedfernDid
Reviewed in Canada on November 17, 2021
The product worked fine a little pricey
doug martin
Reviewed in Canada on May 7, 2017
Bought this to try and recondition the seals in a floor jack that could not hold it's position. It is not the oil for that job. I drained the old oil and filled itwith bar's and noticed no change.
Recommended Products
CA $100.56
CA $ 44 .99 CA $44.99
CA $49.99
CA $ 23 .99 CA $23.99