Your cart is empty.
Your cart is empty.Upgrade your tractor excavators and Class 1&2 equipment with the Bonbo Hydraulic Top Link Cat The inclusion of a locking block and non-return valve guarantees that the adjusted position is maintained over time, providing enhanced stability and precise control. With a push force of 7200 lbs and a pull force of 4600 lbs at 2600 PSI, this hydraulic top link delivers impressive power, making your work more efficient and productive.
Domino
Reviewed in Canada on March 4, 2025
Installed well. Everything fit my JD 4300. The lines are a little on the short side. I had to move them to lower ports to make sure they were not stressed, now they are a good length. It does appear to be leaking at the fittings to the locking block. I have tightened them up and will see if its still leaking (Fingers crossed)Leaking stopped. Must really tighten all the connections even ones that are factory done.
Tracker
Reviewed in the United States on March 27, 2025
Great deal........ Had to grind down the inner joint just a bit to get it to fit then all the rest went together easy. No leaks and up and running. Fits my Kioti 40 hp well and looks like it will last for years.
Customer
Reviewed in the United States on February 7, 2025
Easy to install, wish the hoses were 3 or 4 inches longer
Duck
Reviewed in the United States on February 6, 2025
works well. Setup is very important
Great and fast
Reviewed in the United States on February 27, 2025
It has leaked from day one.
Derek O'Brien
Reviewed in Canada on January 13, 2025
Collar on the ball joint is about 4mm wider than the ears on the tractor. Had to shave them slightly. Also, the quick connect didn’t quite fit. I just unscrewed the supplied ones and bought new ones from kubota. Cost an additional $62CAD for those. I knocked off 1 star for those mods required. Once installed, works great. Curious to see how it holds a ICB totes full of wood.
Migratory Catfish
Reviewed in Canada on September 16, 2024
Works really well. Seems plenty strong for the task I've been putting it through: flail mowing, skidding winch, landscape rake, and a bit of box-blading.The ability to adjust implement angle in seconds from the seat is something you just need to have. Seriously. Get one. Wish I'd done it years ago. Whether it's micro-adjustments for cutting or grading height, or fine-tuning PTO shaft angle for optimum operating smoothness, I can't overstate the benefits of a hydraulic toplink.Knocked off one star because the weld at the rod-end eyelet has noticable and somewhat significant undercut on the rod side. The rest of the weld looks good, and I suspect the eyelet will probably wear out before the weld fails. Nevertheless, it's a critical weld point, and a little more attention to that detail should have been given.
Kelly Cowser
Reviewed in the United States on June 25, 2024
I recently put this on my 3039 John Deere Tractor. This cylinder makes hooking and unhooking from the 3 pt a breeze. I would highly suggest having one of these for the convince factor. It seems to be holding up well to the abuse it goes through.
Rich Aitzetmueller
Reviewed in Canada on April 18, 2024
actually it works deadly! bolt right on to my TYM T25. Plugged right in, and is strong. Super happy
Recommended Products
CA $13.97
CA $ 6 .99 CA $6.99