Your cart is empty.
Your cart is empty.Curt has invested in the technology necessary to produce a full line of exceptionally strong and attractive balls mounts. Ball mounts are robotically welded to ensure accurate, consistent cuts and clean, strong weld lines. Once welded, these mounts undergo a process that creates a flawless surface for the application of highly durable Curt powder coat finish. Class I ball mounts are for 1-1/4 inches x 1-1/4 inches receiver tubes and are rated at 2,000 pounds gross trailer weights.
ZS-MTL
Reviewed in Canada on August 31, 2024
Ran U-Haul trailers 5x8 twice and works well.
Robert Pulliam
Reviewed in the United States on May 1, 2024
I haven’t had the occasion to use it yet, but it looks sturdy and after I use it I’d be glad to review it.
Allen W.
Reviewed in Canada on November 11, 2024
Works great on my polaris sportsman for towing my log splitter.
cristian
Reviewed in Canada on June 2, 2022
I think this should be about half its price. It does feel like a solid, high quality piece though. Raises my tow ball so that my trailer is perfectly level
Doggie Bag
Reviewed in the United States on December 9, 2020
My 2019 Fiesta ST has the CURT 11067 hitch receiver which mounts fairly low and recessed (underneath the bumper). This reaches way down in there and elevates the ball (for my Harbor Freight trailer).I drilled another pin hole exactly 2 1/4" ball-ward of the stock hole, which effectively shortens the ball mount and puts the ball just behind the bumper (with about 1/4" clearance). This makes for more stable handling with a trailer.
ted
Reviewed in Canada on September 12, 2019
Just as described, solid, good welds, great product.
JW
Reviewed in the United States on May 17, 2018
Bought this for a class 1 trailer hitch mounted to my wife's 2014 Honda Accord. Initially, I tried using a regular straight mount, but the bottom of the mount scratched on the pavement when pulling out of our driveway which has a slight decline. Since the Accord's hitch is so low to the ground, I quickly realized I needed much more ground clearance. This mount with it's 5" rise fits the bill perfectly. Now I can drive down declines or go over humps without worrying about the mount hitting the pavement.
LARRY b
Reviewed in the United States on May 1, 2018
I am towing my little 14' bass boat with a Nissan Altama. I have the Nissan frame mounted hitch on, but the ball was only 5 inches above the street. Did not even extend but 2 " out from the bumper. I guess the hitch would have been alright for a very small utility trailer, but even that would be pushing. The Nissan dealer that installed it said it was rater for 2,000 lbs. The Altama it's self is rated for 1500 lb toe weight. My boat is less then a 1,000, I thought I was being smart by going to the Nissan dealer....I thought wrong! Anyway I found the riser/extender here, and by golly it is perfect. Did the Nissan dealer tell me I might need an extender...No. Was he happy to take my $225 for the hitch and $ 150 for the install...YesWas he smart enough to see the problem and help a customer out...No.This riser/mount took me all of 2 min. to install, hooked up the trailer and went around the block....PERFECT!
pet
Reviewed in Canada on November 28, 2017
Great product . Fast shipping .
retrodog
Reviewed in the United States on October 19, 2017
This works really well for anybody who wants to pull a small trailer with a car. I got it for use with my Nissan Leaf and Chevy Volt. If I used anything less, the trailer would be riding low on the front (nose diving). I started with a 3" equivalent that I could buy locally but that just wasn't enough. This one is ideal on the Leaf. The Volt sits an inch or so lower so I guess I can get by on that one as well. I also bought one of the Reese Towpower balls with a 3" thread post. I might use that to get a bit more height if need be.Anyway, this hitch/drawbar is great. Very strong and solid. Standard thick glossy finish as well.
RTB
Reviewed in Canada on February 26, 2016
Fits perfect on my 2010 Lincoln MKZ. Depth and Rise are bang on for clearance on my car. SOLID BUILT ball mount. This piece of solid steel is not giving way.FYI: You need a 1/2" Receiver Pin, not 5/8"
SQP
Reviewed in Canada on December 1, 2016
Compatible with my configuration however the paint was chipped in a few places but I just spray painted it over as I need to get it installed ASAP.
Recommended Products
CA $67.99
CA $ 26 .99 CA $26.99
CA $160.46
CA $ 71 .99 CA $71.99