Your cart is empty.
Your cart is empty.DIG adjustable six-outlet PC drip Manifold is used to retrofit an existing 1/2" sprinkler riser into a six outlet drip irrigation system without altering or increasing the total flow of the sprinkler system zone. The six-outlet Manifold with 1/2" female pipe thread has six independently adjustable pressure compensating outlets with flow rates between 0 & 20 GPH at Operating pressures ofup to 60 PSI. The adjustable six-outlet PC drip manifold's six rotating 1/4" barbed outlets with flow control knobs offer installation flexibility when the unit is incorporated into a new system or when replacing any of the sprinkler heads in a zone, each accepting 1/4" Micro tubing, 1/4" soaker hose, or the addition of drip emitters or adjustable stakes to bring water to each plant root zone at a maximum flow of 20 gphper outlet.
Sandra Milosevich
Reviewed in Canada on July 20, 2024
I like the control valves for each port. I am sure this manifold will be fine
Regas
Reviewed in the United States on September 5, 2023
Manifold works perfectly in my hydroponic system.
Michael J Sells
Reviewed in the United States on October 4, 2023
Two things that I have found with this is that the unused ports tend to leak a little if the knob if off hust a little. By cutting a piece of tubing and sealing it resolved that.The bigger thing is that every couple of days I need to tweak the knops open because the drip stops.
Customer
Reviewed in the United States on February 6, 2020
I bought this adapter thru Grow weed easy web site link along with a pump with a 160 GPH rating. If you want just a drip with four valves open then this is ok. If you want a decent flow you must have at least have 400 GPH to over come the restrictive valves and short length of tubing for hydroponics.
Richard W.
Reviewed in the United States on March 27, 2019
This is a great product for individually adjusting water flow for up to 6 plants. It eliminates the need for different time periods of plants needing different amounts of water. And you can run the outlet lines open ended without need for the GPH dripper ends. The manifold list that it is pressure compensated but I recommend a pressure regulator at the output of the water solenoid of 25 - 40 psi.
Yasna
Reviewed in Canada on February 27, 2018
Great product. Works as expected. Fast delivery. Everything as expected.
Stephanie A
Reviewed in the United States on March 1, 2017
I like how you can adjust the flow of water coming out, even to a trickle, with either the brown knobs or by turning off some of the outlets and leaving some on. Standard tubing works...1/4" inside diameter might be pushing it as far as how big of a line you can use with it. To clean, I just soaked in bleach water and then ran plain water through it to rinse it all out.
Recommended Products
$14.44
$ 6 .47 $6.47