Your cart is empty.
Your cart is empty.Aluminum racing radiator is designed to provide maximum cooling efficiency to prevent premature engine failure. Its light-weight, and high-heat transferring aluminum features a tube and fin design that, dramatically increases surface area that enables the heat to dissipate more efficiently. This racing radiator is at least 40% more efficient than stock ones. Most importantly, it has a much higher capacity for coolant than stock ones, which means that your cooling system will be more efficient and will be more resistant to temperature surges in racing applications.
Customer
Reviewed in the United States on September 12, 2024
It's overall a good radiator, oem fans fit had to miss with it a little to put the bolt in but wasn't a big deal and when putting coolant it takes about the same amount as the OEM.
Tony martinez
Reviewed in the United States on September 1, 2024
Bolts don’t match up or fan holes for screws don’t waste your time and fan is not close to radiator
John J Wagner
Reviewed in the United States on October 8, 2022
All aluminum and has more volume than original equipment Denso radiator. Pretty much plug and play. Some of the wholes didn’t line up perfectly but it installed ok. It’s not a polished aluminum finish. It’s painted silver. No leaks so far and I definitely prefer it to a plastic alternative. Good value for the price and better than stock.
Jason
Reviewed in Canada on February 9, 2021
Heard various opinions on quality of DNA rads for the Acura RSX and have to say the quality and fitment is amazing. The only thing I didn't like is they paint the rad with silver paint. For the price that's acceptable I guess
AD
Reviewed in the United States on January 5, 2021
the right fan didn’t line up with both bolts so only bolted one side of the right fan the left fan lined up perfectly no leaks hopefully last up to expectations and good for 97$ now it went up in price
Mark
Reviewed in Canada on November 19, 2020
Fit pretty well except had to shorten the fan bolt mountings so the fan sits flush against radiator. Just used an angle grinder, took 5 minutes or less. Other than that no other mods to fit needed.
M
Reviewed in Canada on November 17, 2020
This radiator seems to be hit or miss for many people who purchased it. The manufacturer lacks quality control, but what can you expect for such a cheap price!? Unfortunately for me I was one of the unlucky ones. The radiator leaked horribly once it was installed. Total waste of time. Always remember.. You get what you pay for! If you want a good quality 2 row aluminum radiator you need to spend over $300. Buyer beware!
Angry Orange
Reviewed in the United States on June 27, 2019
First appearences say its heavy duty built construction, solids mounting points(how well they fit and line haven't installed yet), came with free new cap rated 1.1 bar pressure stock pressures, very thick walled tops and bottom looks like 2mm or 3mm thick, but like other reviews its painted inside and outside, checking for leaks now before install and will pressure test before install, some welds are perfect some aren't, there are some questionable welds on the bottom half that looks like they were a little on the cold side and clumpy view the pictures provided and see for yourself but for 100 shipped 2 days prime I dont think you can beat it *update ive installed the dual core radiator and there seems to be no leaks, fitment was great not perfect but great, bolts all your stock own fans right on, only a few little caveat flaws, the only fitment issue is some stand off threaded posts may be too long or not line up completely perfect but requires a wee bit stretch, but nothing major, alot better than buying a mishimoto for more than twice the price and have to spend another two hundred on there fans since with the mishimoto you cant use stock oem fans
Recommended Products
