Your cart is empty.
Your cart is empty.Aluminum racing radiator is designed to provide maximum cooling efficiency to prevent premature engine failure. Its light-weight, and high-heat transferring aluminum features a tube and fin design that, dramatically increases surface area that enables the heat to dissipate more efficiently. This racing radiator is at least 40% more efficient than stock ones. Most importantly, it has a much higher capacity for coolant than stock ones, which means that your cooling system will be more efficient and will be more resistant to temperature surges in racing applications.
Mike
Reviewed in the United States on September 6, 2024
I got this for my 02 Miata and the only complaint that I have is one of the holes for the right side fan did not line up at all. Every other hole was pretty good. I didn’t have to modify anything to fit this in my car. It’s definitely a tight fit, but with a little wiggle and tilt you can get it to fit just fine. If that doesn’t work, hit it with your purse! Also not sure why they did this, but mine looks to be spray painted with a high metallic silver.
Rekha
Reviewed in Canada on June 3, 2024
Arrived damaged, the top water neck was slightly crushed. I was able to straighten this enough that it doesn't leak. A piece of packing foam around the water necks would have prevented this.Install was a bit of a pain, the AC condenser needed to be moved in front of the mounts (normally mounted in the rear of the mount brackets) which was very fiddly, and the AC lines needed some tweaking to clear everything. The radiator fan mounts on the rad are about 5mm too narrow and the holes needed to be enlarged slightly for the fans to bolt up. I used some foam around the fan shrouds to help seal them better to the radiator and direct air through the radiator when the fans are on.The stock NB intake has a resonator box on the intake that won't fit anymore and needed to be removed, I cut it off with a dremel and plugged the hole.. no big deal as I will soon be going turbo soon.So far the rad seems OK, Car takes a bit longer to warm up and needed a good 1.5-2 liters more coolant when refilled compared to what came out. Hopefully this is the last radiator I have to put in this car for a while.
Dr. Johnny Fever
Reviewed in the United States on March 14, 2024
its a great fan and the person who talks about the design is bad is nuts its a top tank and a lower tank connected via cooling tubes 2 sets one more set that OEM fans fit other than the hoses on the drivers siade fan hitting the shroud and its plastic and rose trimmers make quick work of making a spot the fans fit the one extra metal part on the passenger fan is what allows u to adjust and make it fit the other mounts for all the complainersTEMP stays in the perfect middle range now !!!!very nice radiator overall despite the bad reviews im very very please and im pretty sure you will be as well
Wayne's RV
Reviewed in Canada on October 30, 2024
There was shipping damage some fins were bent and the holes for the fans were not lined up.
John McCluskey
Reviewed in Canada on September 17, 2022
Fit great.....just had to quickly run a drill bit through a couple holes... Looks the bomb !
Michael Creason
Reviewed in the United States on February 25, 2022
Fit was snug on a 2002 Miata, but considering it is a thicker radiator, that is to be expected. No major modifications were neede, a little bench grinder work on the lower mounting spuds was all, even the existing fasteners were reused. As for performance, outstanding, I have 100 percent confidence this will outperform the plastic OEM radiator substantially.
awesomeness
Reviewed in the United States on November 10, 2022
Overall good construction and fitment only issue is the lower support post holes arent quite big enough and arent lined up very well that is only issues
matt tong
Reviewed in Canada on October 17, 2022
Good price and no leakBut it is not easy to install if your miata have ACHave to modify AC line bracket and intake pipe to fit. Due to the size of the factory Rad fan.If you use aftermarket rad fan it should be easier to install.
randy187
Reviewed in Canada on July 12, 2021
Wasn't perfect but did the job and didn't leak. Great value.
pat triolet
Reviewed in Canada on January 1, 2021
Good product fans didn’t fit perfect had to modify them. Rad itself built solid great welds and fit car itself great.
N Tue
Reviewed in Canada on June 9, 2020
Works good
Customer
Reviewed in Canada on December 13, 2019
Delivery was late.Item did not fit (mounting holes were not aligned to fit on vehicle
Justin S.
Reviewed in the United States on November 15, 2019
If you are replacing your radiator, odds are you are used to encoutering problems and can deal with them. Installing this item is no exception. The metal passenger side fan shroud requires trimming at the hose bung. No biggie, 2 min job with an angle grinder. The same fan does not align perfectly with standoffs and will require trimming at one mount tab to allow clearance for bolt - will also need oversize washer to account for this. As of no, there are no leaks and it fits in the car, but did require minor modification - but again, if you're able to replace a radiator you're able to modify one to fit. I would buy again - assuming it doesn't leak over time.
Recommended Products
$290.87
$ 71 .28 $71.28