Shopping Cart

Your cart is empty.

Your cart is empty.

EZAccessory 2 Wheel Adapters 5x4.5 to 8x6.5 (5x114.3 to 8x165) Thickness 1 Inch

Free shipping on orders over $31.42

$185.27

$ 74 .69 $74.69

In Stock
  • 【Purpose】Convert from 5 lug vehicle to 8 lug wheel, meaning putting 8 lug wheels on 5 lug vehicle
  • 【Fit Vehicle】Fit vehicles of 5x4.5" or 5x114.3mm bolt pattern. Your Garage filter is to confirm fitting of your vehicle only, not for the wheels.
  • 【Convert Wheel】Convert to wheel must be 8x6.5" or 8x165mm bolt pattern. Sold by pair (2 adapters)
  • 【Quality Assurance】Aircraft quality TRUE forged 6061 T6 lightweight billet. CNC machined with precision craftsmanship. Features in high load capacity and keep stock ride. Anodized for corrosion resistance. Heat-treated 10.9 grade steel studs with mounting lug nuts included.
  • 【Attention】14x1.5 studs; 1" (25mm) thickness; 73.1mm center bore; Adapters will give you widened stance as well as more stability. If vehicle studs protrude outside the inner piece adapter, you will need to shave down vehicle studs.


Product Information:

These are one piece wheel adapters that are used to convert 5 lug 4.5-inch (114.3mm) bolt pattern hub to fit wheels of 8 lug 6.5-inch (165.1mm) pattern. Adapters are built with 125.2mm hub centric lip which will center for a factory fit. They will space out your wheels for 1-inch. CNC machined with precision craftsmanship using 6061 T6 aerospace quality billet. High quality studs are pre-installed. Sold as a pair for 2 wheels.

Bolt on 5 Lug 4.5" Bolt Pattern Vehicles

To Fit 8x6.5 Bolt Pattern Wheels

Adapter Specification:

Vehicle Bolt Pattern: 5x4.5-inch (114.3mm)
Wheel Bolt Pattern: 8x6.5-inch (165.1mm)
Studs Thread Size: 14x1.5
Hub Bore Size: 73mm
Thickness: 1-inch (25mm)
Lug Torque: 95 ft-lbs

Technical Notes:

If hub studs protrude outside the inner adapter piece and prevent the outer adapter piece from sitting flush, it is required to shorten the factory studs.


Heather
Reviewed in the United States on February 20, 2022
The only thing that would make these better is if they were 1.25" thick so the stock lug nut would be flush with the top instead of sticking out just ever so slightly. Alignment is good. I used the 2" - 2pc on the back to match what was already there in a different lug pattern, but didn't want that much sticking out up front so I went with the 1" - 1pc. They work fine with 12.5x35x16 Ironman tires with my 3.5" lift on my 1990 XJ that I share tires with off my 3/4 ton 1997 suburban. Good way to swap tires & rims since my XJ doesn't see much street time.
Loveunderdog
Reviewed in the United States on December 8, 2021
The Spacers themselves are High quality excellently made. The issue was that the holes were a little bit off and I had to reamed them with a step up bit. Which was a bit of a daunting task beings the metal is extremely hard.
ryan s.
Reviewed in the United States on November 22, 2021
THESE DO NOT FIT 8X6.5 WHEELS. They are extremely close, but not quite. You could burr out the holes on your wheels slightly to make them fit, but obviously you shouldn't have to do that.
ftt
Reviewed in the United States on April 15, 2020
If I could give negative stars I would. Flew apart while going down the road. Caused me to fly off the road tire passed me up. Unsafe product do not recomend for anything other than carrying a spare
Recommended Products