Your cart is empty.
Your cart is empty. 8-Channel Relay Module
It is also able to control various appliances and other equipments with large current.Standard interface can be directly connected with microcontrollers.
Red working status indicator lights are conducive to the safe use.
8 Channel DC 5V Relay Module with Optocoupler
Feature:
Can be used as microcontroller development board module can be used as home appliance control
5 V-12V to TTL control signal
The control signal DC or AC, 220V AC load can be controlled
There is a normally open and one normally closed contact
A power indicator light
A control indicator, pull off, disconnect does not shine
Transistor drive to increase the relay coil control pins high impedance
The control pin has a pull-down circuit to prevent malfunction relay vacant
Specifications:
Product Name: 8-Channel Relay Module
Output Channel: 8
Power Supply: 5V
Load Voltage: AC 250V 10A, DC 30V 10A
Total Size: 137mm x 56mm x 17mm/ 5.4" x 2.2" x 0.7" (L*W*H);
Mounted Hole Size: 3mm/ 0.12"
Mounted Hole Center Distance: 132 x 50mm/5.2" x 2"(L*W);
Material: Electric Part
Package Content :
2 x 8-Channel Relay Module
Vine
Reviewed in Canada on March 8, 2025
I had a light string programmer project in mind and this worked out perfectly for non-RGB addressable lights.The relay 10amps limit is plenty high for even very long LED lights strips.It worked fine on my arduino, and I'm looking forward to do a RPI implementation.I like that the boards came with mounting holes on the corners making it essy to fit in a custom 3d printed case.The price being under 30$ for 2 (or 16 channels) is very reasonnable.
Matthew J. Hunt
Reviewed in the United States on January 4, 2024
Easy to address each relay via Arduino. Works as it should. Very good price!
Customer
Reviewed in the United States on January 23, 2024
I used this in conjunction with a raspberry pi to build an open source sprinkler controller. These relays worked fine with 24V AC. They were able to be independently controlled by the raspberry pi with no real issues. There were no schematics included, but it wasn't hard to figure out.
Recommended Products
CA $13.99
CA $ 6 .99 CA $6.99
CA $51.76
CA $ 25 .99 CA $25.99
CA $245.00
CA $ 99 .00 CA $99.00