Your cart is empty.
Your cart is empty.AM SRS String GUIDES
Daniel Davinci
Reviewed in the United Kingdom on May 6, 2024
Great! Upgraded by rusted Squier regular trees. These seem to perform and look so much better. The strings aren't sticking at that point now. Recommended.
Allumitive.
Reviewed in Canada on January 21, 2024
perfect for up grades on your string trees on strats etc
Sam
Reviewed in Canada on June 25, 2023
They came in a fender packaging so... Looks legit? Idk. But the quality is good.Anyway beware of a little drilling needed. Of course if you are installing on a head that had non, obviously, but also on an upgrade from the "vintage" types that only use one post, as these new ones use an extra downward peg next to the screw to keep the string tree from turning. Take your time, figure it out.
Customer
Reviewed in India on January 17, 2023
I received it in good condition, which was very important.As for fitting, you’ll need to drill a small hole to allow the small anchor to go into the wood. That’s there to prevent the string tree from getting displaced under tension.Much better than the stock tree on my MIM Strat.
bobby lopes
Reviewed in Canada on January 21, 2022
Great product.
Englee
Reviewed in Canada on July 6, 2021
Workrd well.
Pedro Vasconcelos
Reviewed in Spain on November 22, 2021
Comprei para substituir os que vinha na minha Tele Player. Tive de fazer apenas um furo mais, mas instalei rapidamente e funciona na perfeição. Original Fender
Stuart Blair
Reviewed in Canada on June 20, 2020
Fender original parts. No performance to comment on.Just remeber you have one shot to get it installed correctly unless shoddy working your calling card take you time and do ot at next string change if your lazy self cuts corners and wont take the stings off to install. Do you mother proud and make the effort. Pick up your dirty clothesNo wonder your girlfriend left you. Your still a child...a man child. Now install these right or let someone who knows how to use a screwdriver do it.-your secret woody Allen personality
Underpants
Reviewed in Singapore on December 4, 2020
Quality is fine but was not aware that there is a locating pin on each of the string guides. As I didn't want to drill a new hole in my headstock I decided to cut the locating pins off prior to installation.
Gary
Reviewed in Canada on August 1, 2019
Be careful drilling any new holes and measure properly. The Jaguar comes with only 1 string tree so I had to drill for the second, worked out great. The Jaguar comes with 9's string set, a little too loose and the extra tension helps on the factory installed bone nut. The Jaguar also has a tremolo bar and I think the rollers will help with tuning stability.
Customer
Reviewed in Canada on June 18, 2019
The string tree itself is fine, but the screws are very cheap and easy to strip the head during installation.
Achilles
Reviewed in Canada on September 22, 2018
Works well. I would advise watching a Youtube demo if you are installing on a headstock that requires some drilling.after adding in the shipping cost I could have purchased these for slightly less money at my local guitar center. I would recommend these string trees to help reduce string drag.
Rene
Reviewed in the United States on July 11, 2016
They work great and finally I did something that noticeably improved tone.I had switched my bridge out and added a bone nut and nothing was making that noticeable of a difference. My tuning and vibrato ability with the trem staying in tune improved, but no positive tone difference that I could hear. Then I installed these trees, one on my fender sonoran acoustic and one on my strat that I was just talking about, and on BOTH guitars the high e and b strings sound noticeably better, clearer. It's subtle but a good way to describe it would be it sounds more expensive! The batwing trees that came on my guitar were of good quality and did not affect trem use, but they were obviously muffling the strings sound a little bit,which makes sense since they touch the string a lot more and pull the string down furthur. Awesome. It's important to note that you can file off the nubs on the bottom of these relatively easy, you just have to go slowly and make sure you just get the nub, and not part of the bottom. You could very easily create an angle if you file off part of the bottom unevenly. I did mine by hand while watching a movie and took my sweet time.
Recommended Products
CA $21.99
CA $ 10 .99 CA $10.99
CA $16.29
CA $ 7 .99 CA $7.99
CA $8.09
CA $ 3 .99 CA $3.99
CA $23.71
CA $ 11 .99 CA $11.99
CA $11.71
CA $ 5 .99 CA $5.99