Your cart is empty.
Your cart is empty. You can change the motor wiring positive and negative, and change the direction of rotation of the motor, so they have 2 characteristics:
-- Turbine worm gear motor with self-locking, that is, in the absence of electricity in the case of the motor, the output shaft is fixed;
-- The direction of the output shaft of the gearbox is perpendicular to the motor shaft, and the direction of the output shaft of the whole motor body is relatively short to the ordinary deceleration motor, and the utility model is widely adapted to occasions where the installation dimension is required.
Specifications:
Model: JSX69-370
Material: Metal
Rated Voltage: 12V
Speed: 120RPM
D Shaped Box Shaft Size: 6 x 14mm( 0.24" x 0.55")(D*L)
Female Thread Diameter: 2.5mm(0.1")
Motor Body Size: 30.8 x 24.4mm(1.21" x 0.96")(L*Max.D)
Gear Box Size: 46 x 32 x 25mm(1.81" x 1.26" x 0.98")(L*W*T)
Main Body Size: 76.8 x 32 x 25mm(3.02" x 1.26" x 0.98") (L*W*H)
Motor Pins Numbe: 2
Net Weight: 142g
Application:
Label machines, remote control curtains, automatic voltage regulators, barbecue grills, ovens, washers, waste disposal machines, household appliances, coin machines, paper currency recognizers, automatic actuators, coffee machines, towel machines, printing machines and Stage lighting. This section is suitable for small motor configuration high speed ratio, the installation space is limited occasions, large torque output.
Packages:
- 1 x DC Geared Motor
Russell Garrett
Reviewed in the United States on February 2, 2025
I like to tinker. I purchased this motor 4 months ago and just got around to using it to make an automatic live insect feeder. I just finished test running the 3D printed turntable for 24 hours and it is working better than my expectations.
Christopher Quayle
Reviewed in the United Kingdom on February 6, 2023
For years I've been hunting for a really slow-turning motor for turning a disco ball at off-grid parties (IKR?!), ideally battery-powered.Naturally, commercially available ones are easy to find - but they turn at 5rpm, which is enough to induce audience vertigo! I've even tried using low-voltage PWM units to 'dial down' the speed, but around 2 to 1.5 rpm the pulses seem to be too spaced apart to run such a motor at its rated voltage (4.5-5.0v).Finally, I took a punt on one of these.Happy days!Sure, there's a little noise from the reduction gear - but now the points of light reflected off a mirror ball revolve as steadily as the sweep-second hand of a Rolex.Best of all, it was a doddle to fabricate a little plywood case for it (see pic below) and connect a tiny 2800mAh powerbank, which will happily run it for many, many hours (I haven't tested its full capacity, but it's done easily 5hrs so far, turning a smallish mirror ball).I've no idea what other uses an excellent little DC motor like this has, but as you will have gathered I am more than happy to recommend it!
bgrimmly
Reviewed in the United States on May 4, 2019
15 RPM 12v version of this motor was bad. Used it for less than 2 minutes, then it disrupted my power supply. When I tested it with an Ohm meter, I found that the motor contacts/windings were almost directly shorted (5 ohm reading).It also had a weird ticking sound when the motor went 'forward' (normal polarity on the connections). There was no ticking noise when it was run 'backward' (reverse polarity).Good thing my power supply has built-in safeties to prevent it from getting damaged.Not sure I'll buy again.
Customer
Reviewed in the United States on November 12, 2019
This turned out to be a little underpowered for what I was looking to use it for, but decided to keep it on hand for another project that I have been thinking of doing. For it's size it has a fair amount of torque.
S.O.
Reviewed in the United States on November 24, 2018
Broke trying to use it the first time
Recommended Products
$32.31
$ 17 .27 $17.27