Your cart is empty.
Your cart is empty. About HICTOP Textured PEI Bed 310*320mm Build plate PEI Sheet and Magnetic build Plate Adhesive Ender 3 max PEI for CR-10 V2,CR-10 V3,CR-10S pro,CR-X, CR-10 pro V2,Ender 3 max,Ender 3 max Neo Anycubic Kobra Plus 3D printers
Size: 310*320mm（12.2*12.6inch）
Package included: 1 x Steel platform with PEI flexible surface
1 x Magnetic bottom sheet with Adhesive
Reynaldo H.
Reviewed in Canada on March 4, 2025
Works great build still well.
Gordon
Reviewed in Canada on March 3, 2025
Works great used smooth side for 6 prints using Sunlu ABS Clear with zero problems. Great print bed, I like the smooth finish it leaves.
Elia
Reviewed in Canada on February 24, 2025
Oh my god, this hictop bed changed my life in 3D printing. The filaments stick to it so well, it's amazing. Go, order it, you will thank me later. A 3D printer noob.
Brian Durand
Reviewed in Canada on February 21, 2025
I bought it awhile ago but just started using it a few months back. So far it is great, it is much stickier to get off the prints than the one that Bambu Lab sells. That is a good thing though as I was getting a bunch of failures off of that one. So far I have not had one failure on this plate.
Renato
Reviewed in Canada on January 5, 2025
I bought the 410x410 plate to replace the glass plate of my 6 year old Anycubic Chiron printer. I like this printer so much because of how big the build volume is.. A few months ago, I installed an automatic levelling system to the printer and this PEI textured plate will make this printer great. BTW, the exact plate dimension of Chiron is 420x410 but it's okay because the actual build volume of the printer is 400x400 only.If I have to recommend on how to install this thing, you have to remove the glass plate because if you install this on top of the glass plate like some of the instructions I saw at YouTube, you will lose much of the temperature setting of the top plate. But if you are like me that I removed the glass plate, it would require a lot of effort to remove the plate because the adhesive tape that holding the glass to the heater metal plate is hard and lots of scrapping to do, but it could be done. Set you bed temperature to 100 deg and using spatula start lifting from the corners. A warning, the metal heater plate is so thin that even you put is this product of of it, you can't get the bed level and straight. It's a good thing for me that I worked in fabrication, so grab a scrap 1/8 aluminum plate, cut it to size and stuck it to the heater plate with a double sided tape and was able to get the correct levelness of the bed. After that, then that's the only time I put in the magnetic underside which will hold the PEI plate.With the glass plate even with the automatic levelling system, the print's will not stick without a good amount of glue applied to the bed. With this PEI plate, I printed the smallest model I can find and came out good without any glue. Then printed a bigger model for 9 hrs again without glue at 55 deg build plate setting and no issues at all.I can recommend this product and as a matter of fact, I bought the 235x235 plate to upgrade the build plate of my other printer. Hope this review will help someone out.
John
Reviewed in Canada on January 12, 2025
Adhesion is great. Better than original Bambu Textured PEI. Haven’t tried the smooth side yet.
Leslie Thomas
Reviewed in Australia on September 7, 2024
It does the job expected of it.
Can't be cautious enough!
Reviewed in Canada on July 31, 2024
TPU, PLA stick without glue!! Easy to remove. Only drawback is hard to realign build plate onto magnet. Some systems have alignment feature at the back to align before you drop onto magnetic surface. If you dont mind always being misaligned... then definitely worth it!! Fits perfect on Tenlog D3 pro
Steven Carter
Reviewed in Canada on August 21, 2023
The media could not be loaded.
Alex Hauser
Reviewed in Germany on October 14, 2022
Spitzenqualität mit super Eigenschaften.
Victor
Reviewed in France on April 18, 2022
J’en ai essayé beaucoup, mais aucun n’a était aussi efficace que ce plateau, ça change vraiment la vie.Adhérence fantastique avec un décollement automatique de la pièce quand le plateau a refroidit, à nettoyer en douceur à l’Eau très chaude et savon avec une éponge douce pour ne pas endommager la structure du plateau. Séchage sur lit chauffant et c’est reparti.J’aurais aimé le découvrir plus tôt tellement il est formidable.Allez y les yeux fermé ça change la vie, le prix est légitime au vue de la qualité du produit.
Voyageur44
Reviewed in France on August 22, 2021
Produit bien reçu et emballage correct, mais apres 2 à heures d'utilisation à 65° des cloques se presentent et rendent le tapis inutilisable.a eviter donc
Chusticiero
Reviewed in Spain on December 29, 2021
Lo he colocado en una Artillery Genius cuidando de que no toque contra los perfiles del eje Z al desplazarse en Y porque el fleje es 1,5 cm más grande que la cama. Llevaba dos años peleándome con la nivelación de la cama de la Genius, cada dos impresiones tenía que nivelar, ha sido poner el fleje y se terminó la tontería. No puedo decir nada malo de este producto, para mi es un 10/10. Las piezas se adhieren como lapas cuando está caliente y se despegan solas cuando está frio, estaba ya teniendo problemas con el PETG y la adherencia, porque tenía bobinas un poco viejas que ya no se pegaban en la primera capa, con el fleje se pegan como SuperGlue, no tengo que nivelar la cama, no se ve ni un solo signo de desgaste después de 10 días de uso continuo, una maravilla. Lo malo es que no lo compré antes por miedo a estropear el cristal de la impresora y llevaba dos años a palos con la adherencia.
Recommended Products
