Your cart is empty.
Your cart is empty.IdeaFormer-3D Smooth PEO PET Build Plate for Anycubic Kobra 2/Kobra 2 Pro/Kobra 2 Neo, Flexible PEO PET Spring Steel Sheet Kobra 2 Printer Plate Platform 230x230mm
aaron winter
Reviewed in the United States on February 20, 2025
The price was right, and it worked amazingly till I put in the wrong 3d print profile, and the hot head went across it and scratched it badly. The texture was terrific and worked fantastic on the bottom of my prints. Adhesion was good as long as u did a light clean of every print. Just use a rubbing alcohol pad. Durability was excellent till u put the wrong profile on our printer, and it dragged and dug into it. Heat retention is pretty good. Stay warm and print perfectly with the right setting and dry filament
Shao
Reviewed in the United States on February 13, 2025
UPDATE: IdeaFormer-3D reached out to me after my initial review, they were clearly quite concerned. They sent me another plate to test, as there was some concern that something may have been wrong with the first one. This plate behaved a bit differently, and I was a able to get it to work somewhat quickly. My advice when using this with PETG, dont simply clean it with Windex or 409 as is common. Use something like Dawn dish washing soap, a clean sponge, and very warm water, and wash it WELL in the sink before first use. Whatever residual was left was completely removed this way, and did the trick for me.Giving them 5 stars for outstanding customer service, and a genuine concern for their products performance.Initial Review: Absolutely useless with PETG, tried every trick I know, but it just wont stick properly. Tried 3 different kinds of PETG I have, and none will work.
Customer
Reviewed in the United States on February 13, 2025
Worked great in the Qidi Q1 Pro! Fit perfectly, good adhesion, will buy more to have extras. Leaves a carbon fiber look on everything that touches the bed!
Elron Hubbard
Reviewed in Canada on January 28, 2025
Absolutely nothing wrong with this plate. I see comments aboot quality and I have no concerns... The only thing everyone needs to remember is to re-level and calibrate this monster. I would even recommend running a test print for your offset.. If you do that, plus basic 3D printing things, this plate will serve you well.For what its worth, I have put this thing to work and I am debating on getting a second so I do not have to wash it as often
Leo S.
Reviewed in Canada on January 2, 2025
I bought this product thinking it would be a quick swap with my regular build plate, but it's a slightly different thickness. I have a AnyCubic Neo 2 Kobra. I went from a z-offset of -1.97 to -1.67 before everything started printing fine. Through some trial and error I also scratched up the surface of the plate, but that's not the manufacturers fault. Just make sure to check before you start printing that it's not too low. The paper test didn't really work that great for me, but it's always something with 3D printers. Use your judgement and the prints will come out fine. I really like the glossy result of the holo print and the results are smooth as silk.Highly Recommend this product!
Danny M.
Reviewed in the United States on April 4, 2025
I love the patterns this leaves on the prints. I have printed a couple of items on this build plate and never had a fail due to adhesion but finished prints are easier to remove than they are from the factory build plate.
DerekM
Reviewed in Canada on December 20, 2024
I wanted a textured surface for a print I was doing, thought the carbon fiber pattern would look nice when I'm printing black PLA. I could be my settings, I've only done a few prints, but it didn't leave too much of a carbon fiber pattern. Prints released without issues on that side, but the other side seem is very soft and with the same settings it stuck really well and was super difficult to get the print off leaving some marks in the surface. This other side is almost a rubbery layer, I'm not used to printing on. Maybe after playing with the settings I'll get some better results. Again, didn't leave much of a texture on the print but fine as another surface to print on.
Shopping !
Reviewed in the United States on December 18, 2024
Does not fit m5c as described. Works great. Just remove m5c corners
Recommended Products
