Your cart is empty.
Your cart is empty.Product Description
Professional Mirrorless Camera Hand Strap
This is a professional hand strap specially designed for most mirrorless cameras with 1/4''-20 tripod socket and tiny round neck strap eyelet.
It can effectively relieve hand fatigue, provide a better feeling during shooting. It is definitely a good partner to make your photography more easier!
Installation on the bottom: attaches to the camera via the 1/4"-20 screw
Installation with strap eyelet: attaches to the camera square eyelet directly
Installation with strap eyelet: attaches to the camera eyelet via the zinc alloy buckle (Your camera has to have a tiny round hole on the shoulder)
It is compatible with most mirrorless cameras that have a standard 1/4"-20 tripod socket on the bottom and a tiny round upper strap eyelet. One end screws into your camera's 1/4''-20 tripod socket and the other back threads through the triangle split ring on your camera's strap eyelet or via the zinc alloy buckle included in this JJC hand strap.
Below are a few compatible camera models for your reference:
- Sony mirrorless cameras: ZV-E1 / ZV-E10 / A6000 / A6100 / A6300 / A6400 / A6500 / A6600 / A6700 / A1 / A7C / A7C II / A7CR / A7 / A7 II / A7 III / A7 IV / A7R / A7R II / A7R III / A7R IV / A7R V / A7S / A7S II / A7SIII / A9 / A9II / A9III / FX3 / FX30
- Fujifilm mirrorless cameras: X-M5 / X-T5 / X-T4 / X-T3 / X-T2 / X-T1 / X-T50 / X-T30II / X-T30 / X-T20 / X-T10 / X-PRO3 / X-PRO2 / X-E4 / X-E3 / X-E2S / X-E2 / X-H1 / X-H2 / X-H2S / X-S20 / GFX100SII
- Panasonic mirrorless cameras: GX9 / GX85 / GX8 / G9 / G95 / G85 / G7 / GH7 / GH6 / GH5S / GH5 / S9 / S5 / S1 / S1R / S1H
- Canon mirrorless cameras: EOS R / RP / R3 / R5 / R6 / R6 Mark II / R7 / R8 / R10 / M50 / M6 Mark II
- Nikon mirrorless cameras: Z8 / Z9 / Z7 / Z7II / Z6 / Z6II / Z6III / Z5 / Z50 / Z30 / Z fc / Zf / Z50 II
- Olympus mirrorless cameras: OM-D E-M10 / E-M5 / E-M1 / E-M1X / OM-1
- Leica Q3 / Q3 43
Note: If your camera has a round tiny neck strap eyelet with extra triangle split ring, we highly recommend you to take off the extra triangle slit ring and apply the zinc alloy buckle included in this JJC hand strap as this will bring you a much more comfortable hand feeling.
Compatible with most tripods
The metal base is Arca Swiss Type quick release clamp with a standard 1/4’’-20 socket underneath, this feature allows you to put your camera to a tripod or other devices with Arca Swiss clamp or 1/4''-20 screw.
The metal base has a 90 degree adjustable eyelet which allow your camera to be connected by any quick release shoulder strap or neck strap with a carabiner.
The strap is adjustable to fit different size of hands.
The strap provides extra security to prevent accidental slipping out of your hand and also effectively relieves the hand fatigue.
This strap is made of microfiber and has a padded cushion inside, comfortable and durable in use.
Lise G.
Reviewed in Canada on March 13, 2025
Cette sangle pour appareil photo sans miroir est bien conçue, confortable et sécurise bien l’appareil. Elle est ajustable et s’adapte facilement à différents modèles.Points positifs :✔ Confortable – Matériau agréable à porter.✔ Ajustable – S’adapte facilement à la taille souhaitée.✔ Bonne fixation – L’appareil est bien maintenu et ne bouge pas trop.✔ Légère et discrète – Idéale pour un usage quotidien.Points négatifs :❌ Un peu basique, pas aussi premium que certaines sangles haut de gamme.❌ Pas forcément idéale pour les appareils plus lourds, manque un peu de rembourrage.Verdict :Une sangle simple et efficace pour les appareils photo sans miroir, pratique et confortable pour une utilisation régulière.
CBad Dad
Reviewed in the United States on March 11, 2025
If you’re shooting with one body and one lens this is a very sturdy and reliable way to hold your camera. This isn’t for casual shooting, but if you’re spending hours with your camera you literally cannot drop your camera.
VoxDeVaux
Reviewed in Canada on June 17, 2024
The description of the product is confusing but once you have it in your hands, it’s easy to figure out how to install. It works with my Canon EOS M50. I have quite small hands and I was able to adjust the fit. It feels secure with just the main strap but totally undroppable with the extra wrist strap. You can also mount the camera on a tripod without removing the strap. There is also an adjustable hole to attached a neck strap. For me, I got this to replace the neck strap - much more functional for me.
Customer
Reviewed in the United States on December 8, 2024
This is a great buy it holds the camera safely every other photographer who has seen me use it has ordered it both pros and amateurs. It is my go to strap and will be buying one for each of my cameras.
Paul G.
Reviewed in the United States on October 30, 2024
It is easier to keep your hand on the camera and shoot whenever you find a perfect angle! Do yourself a favor and get one of these mostly if you do street shooting
Cynicalmike
Reviewed in Canada on August 22, 2023
Fairly intuitive to put on to the R5 - remove old camera strip. Screw in base plate using thumb winding screw. Attach other end to freed up rectangular eye hole from strap on same side as grip (remember the way it was threaded through before you pull it apart). Then adjust either end so that it is appropriately tight and finally adjust length of wrist strap for added security.Fits well and is comfortable. Seems to do the job. I’ve only been using it for a week so too early to see if screw on base plate comes loose as some say.Seems to be just as comfortable and attractive as much more expensive options, costing 2-3x as much!
bill kimmo
Reviewed in Canada on August 12, 2023
Strap appears to be well made; however, it is quite a complicated accessory hand strap as far as installation on my Sony a6700
Cameron Hilbach
Reviewed in Canada on November 18, 2023
The item works just as expected. The only real issue with the item I can think of is that the straps are set to one person's hand and is a little bit of a pain if swapping hands. Otherwise the item is great!Most photographers wouldn't hand off their camera to anyone anyway. Highly recommend purchasing one for your DSLR!
Jeffer
Reviewed in the United States on October 6, 2023
I read a few reviews about sweating, I have not had that issue (I don’t wear it so tight that there’s no air flow). Works great, very comfortable, it’s my new go-to!I only wish I could come up with an efficient quick release to swap straps around. There are some out there but they are clunky and bigger than they need to be, which impacts adjusting a strap like this as snug as it should be. I will eventually make something, I’m sure.
MK
Reviewed in Canada on January 17, 2022
I've only ever used neck straps in the past, but as I upgraded to a mirrorless Canon EOS-R, I've decided to give this style of strap a go.That being said, I only put comfort on 4/5 because my hands are just massive, and the strap is at it's limit to be looser, so it's a slightly tight fit. Otherwise, still very comfortable, the material quality exceeded my expectations, and I can still access all the options I need with my one hand, without the fear of dropping my camera. Especially with the additonal safety strap.On top of that, the built-in support for the tripod is an absolute blessing, and I am also considering purchasing the attachment for the sholder strap as this supports that as well.Definitely 10000% WORTH IT if you're looking to get one for your camera. Super versatile.
Jeanne Sarrazin
Reviewed in Canada on April 30, 2022
Convient tout à fait à ma caméra Canon RP, les attaches sont solides et la dragonne est bien rembourrée pour le confort. Satisfaite!
Nameless
Reviewed in Canada on December 30, 2021
Very comfortable, nicely sturdy, very natural felling with added camera stability. Love it on My Canon RP, Highly Recommend it
Yael DEFAYE
Reviewed in the United States on April 5, 2021
It works really well on my Fuji X-T3. The only downside is when I hold the camera at waist level, it's harder to press on the shutter release. Even if it looks well made, I'm questioning the longevity of the mechanism for mirrorless with that adapter... I'm sure it will last a very long time, but it just feels weird how they did it.
Recommended Products
$46.88
$ 22 .31 $22.31