Your cart is empty.
Your cart is empty.
2" Handlebar Risers For Vulcan 800 1500 1500FI 1600 VN750 Classic(Chrome)
Condition: Aftermarket 100% Brand New，High Class Quality And Very Durable
Strong Durable and Easy To Install，No Install Instructions
Color: Chrome
Placement on Vehicle: Front
No Need to Get New Cables While Some Vulcan 800 Models Might Need a Cable Reroute
These 2” Risers will Raise the Handlebars Upward and Back (Due to the Fork Angle) While Still Leaving Your Bike with a Very Stock Look
Bring the Bars Up and Back Will Make the Ride Much More Comfortable as Your Grip Point Is Closer to You so You Don't Have to Lean Forward as Much.
Note: Not compatible with Drag Bars, most commonly found on Vulcan Custom and Mean Streak models.
Make the rider have a more comfortable cycling posture and effectively reduce long-distance ride fatigue.
FITMENT:
Vulcan 800, 1500, 1500FI, 1600, 2000 Classic/Classic LT/Nomad/Drifter
Package Included: 2 x Bandlebar Riser Extensions, 2 x Bolts, 2 x Wahsers and 2 x Nuts
Paul Andrade
Reviewed in the United States on August 19, 2024
The riser works amazing my handlebars are so much more comfortable now.
Drifter
Reviewed in Canada on July 14, 2024
Installed easily, look great, put the bars right where I need them… definitely recommend.
Tablloyd
Reviewed in the United States on July 10, 2024
Saved me from buying a different seat for my 2024 Vulcan 900 Classic LT. These risers are simple to install with no cable work needed, and they allowed me to put the grips right where my hands rest naturally. Moved the heel-toe shifter counter-clockwise one spline as the downshifts were taxing my 66-year old bad hip. Today was 5 hours + in the stock saddle, a pleasant surprise.
Gary
Reviewed in Canada on June 28, 2024
Looks good on kawasaki now my arms feel better not being stretched so much
Customer
Reviewed in Canada on May 9, 2024
They were easy to install and look like they are part of the bar assembly, may be slightly higher priced then what they actually cost to produce but reasonably priced
Prime Member
Reviewed in Canada on November 8, 2024
Installed on a Kawasaki Vulcan Nomad 1500. No need to replace, extend or adjust anything on the bars. Easy to install and puts the bars where they should be. Quality seems fine, no issues after several hundreds of miles
keith
Reviewed in Canada on August 14, 2023
easy to install and great value for the money
CMAUSA
Reviewed in the United States on December 13, 2023
I’ve ridden motorcycles for fifty-six plus yeas. I’ve owned just about all of the major brands. Lots of Kawasakis including a 700 and a 1500 Vulcans. Good bikes. I’m very familiar with wrenching on them. If you’re not then you cold look at these and wonder how they bolt up. Simple. Take the top handle bar clamp off, lift the bars out, and you’ll gain access to the single through bolt. Pull that on both sides, stick the riser in place, drop the new, longer, bolts in, and from there just reverse the removal process. Theses are nice pieces. They will look like OEM.I ordered them for an entirely different purpose. I needed a couple of riser bushings for a ten foot, metal, farm gate. I was going to make a couple out of aluminum rod but these were perfect and definitely less trouble. They wok great. How is that any kind of test for a motorcycle? The gate creates constant hanging weight and swinging shear stress as opposed to almost zero stress of any kind on a motorcycle. And it really tests the chrome plating. So far there’s no visible marking of wear on the chrome. If my metal hinge can’t scratch the chrome in a week of constant, everyday use, I doubt your cleaning and polishing will harm it ever.If you want to lift your bars this is a very inexpensive, attractive, and functional way to do it.
Recommended Products
