Your cart is empty.
Your cart is empty.Product Description
Speaker Wall Mounts MY-23
We recommend installing the mount with your own screws or bolts compatible with the speakers
The diameter of the pre-drilled holes could be easily found in product pictures.
Package Include:
2 x Black Speaker Mount
1 batch of screw accessories
One-piece die-casting, stronger bearing capacity
Porous adjustment, more precise angle
Drill hole size requirements
drill with a 10mm drill bit. Depth 65-70mm.
If there are no suitable two mounting points on the speaker, you can use four self-tapping screws to fix it.
Multiple angle adjustment
Rotate down 60 degrees
Rotate up 60 degrees
Rotate left angle
right rotation angle
Installation Steps (Concrete wall or brick wall)
1. Separate brackets 1 and 2
2. Draw 4 screw holes
3. Drill the holes with a 10mm drill bit. The depth is 70mm.
4. Drive the screws into the holes and fix them with a #14 wrench.
5. Fix the bracket on the speaker.
6. Fix the accessory screws in the middle hole of the bracket.
7 . Hang the speaker in the opening of the bracket. Use the screws and nuts to fix the bracket.
8. Adjust the angle and replace the accessory screws to the middle hole. Tighten the upper and lower screws.
Frank Guitare
Reviewed in Canada on January 29, 2025
Solide
samy mohamed
Reviewed in the United States on July 4, 2024
i had to drill into the back plate of my speakers because they didnt have mounting holes but the mount itself is very strudy ! although i wish it had more rotation to it but overall its very very good for heavy speakers
jptoo
Reviewed in Canada on July 27, 2024
I recently installed the Howonder MY-23 Heavy Duty Speaker Wall Mounts, and they exceeded my expectations.Pros:The mounts are incredibly sturdy and well-built. They easily support my 60-pound speakers without any issues.Assembly was straightforward and quick, with clear instructions provided.Despite my initial concerns, the mounts are strong enough to hold my speakers securely on a gypsum wall.Overall, I’m extremely satisfied with the Howonder MY-23 Speaker Wall Mounts. They provide the strength and stability I need, and the easy assembly was a bonus. Highly recommended for anyone looking for reliable speaker mounts.
Chris H
Reviewed in Canada on June 3, 2024
Very secure when fasend properly to the wall. The bolts on this bracket do not tighten enough to eliminate chance of vibration at high volumes. Also if mounted in a corner, it is difficult to tighten and/adjust.
Stephane Gauthier
Reviewed in Canada on May 4, 2024
Very solid and well engineered
scubachef
Reviewed in Canada on May 28, 2024
mount fine, it do what it need, rotation and level great, but do not use there screws for any kind of wall under 2 inch thick, which is about all of them except maybe brick. make it a bit expensive since screws are useless and you'll need to buy proper ones.
Greg
Reviewed in France on February 16, 2024
Très bon produit . Facile à installer
Karl Griesbach
Reviewed in Canada on December 31, 2024
Easy install
HLC
Reviewed in Mexico on February 22, 2023
Soy fanático del audio y video, por lo mismo han pasado sobre mis manos algunos soportes para bocinas satelitales y estos son los mejores que he encontrado a la fecha para montaje sobre pared.La instalación la hice sobre muro y no es sencilla, hay que perforar y los tornillos con los que vienen los soportes son gruesos y profundos, por lo que es recomendable revisar el lugar donde se pretende colocarlos con antelación, yo cambié los tornillos por unos un poco mas cortos y menos gruesos ya que las bocinas que iba a instalar no son tan pesadas.Una vez instalados, wow, todos los componentes son de metal por lo que se sienten bastante estables y seguros, se pueden hacer ajustes en los ejes vertical y horizontal para realizar cambios finos.Los recomiendo ampliamente
Paul L
Reviewed in Canada on January 27, 2023
The brackets seem pretty well made and easy to adjust with the pin.The hole spacing to mount on the speaker didn't line up, but the speakersmay just not be standard, but there was a spot where the spacing was right,where the fold was when the base became the neck of the bracket,so I didn't need to drill holes. and wreck the finish.
Neville B
Reviewed in Australia on September 27, 2022
What a godsend!Exactly what I was looking for to wall mount speakers in church.Great value, sturdy product and easy to install.Inclusion of the wall anchors is a real bonus.Delivery time from USA to AUS was really fast!
Lavoie Monique
Reviewed in Canada on May 10, 2022
Pour suspendre les haut parleurs
Flo
Reviewed in Germany on December 10, 2022
Im Lieferumfang befinden sich Messing Spreitzdübel die nur für harte Wände wie Vollziege oder Beton geeignet sind. Ich habe diese für 10mm "Fischer Duopower" Dübel erfolgreich substituiert.Insgesamt wirkt die Konstruktion sehr massiv, (2-4mm Stahlblech). Die 45kg Gewichtsangabe finde ich daher untertrieben, diese Halterung hält locker 100-150Kg aus, wenn sie demensprechend verankert wird. Die Pulverbeschitgung wurde zwar schlampig aber deckend aufgetragend - also ok.Optisch vielleicht fragwürdig, mechanisch absolut massiv und empfehlenswert.Für den Preis eine absolute Empfehlung wenn man eigene Dübel/Schrauben verwendet. (10-12mm)
Recommended Products
CA $450.00
CA $ 99 .00 CA $99.00
CA $26.99
CA $ 12 .99 CA $12.99
Ceiling Mount Holder for Google WiFi Mesh System 2016 and 2020 Reinforced and Perfect Unity (3-Pack)
CA $29.99
CA $ 14 .99 CA $14.99
CA $25.99
CA $ 11 .99 CA $11.99