Your cart is empty.
Your cart is empty.Amazon.ca Product Description
Two piece HSS Inboard Scraper Set # LCSIDE2. These heavy duty round end inboard side scrapers are equipped with thick, stable blades so you can cut aggressively without vibration. These chisels are ideal for making final cuts inside bowls. The scrapers have a radius designed to easily shear the wood and create a clean smooth finish. Larger Scraper is 19" overall length with a blade 6" long x 1" wide and 3/8" thick. Smaller Scraper is 16" overall length with a blade 6" long x 3/4" wide and 5/16" thick.
From the Manufacturer
A Round Side Cut Scraper blade for turners who prefer to make their own handles. Designed for blending the parallel side wall and the curved bottom of vessels and boxes together. It is excellent for undercutting the rims of small bowls.
dash
Reviewed in the United Kingdom on March 6, 2025
well made and easy to use, give a great finish.
Dan Ward
Reviewed in the United States on January 13, 2025
I have been very happy with these. They are thick steel with solid handles. They are a good balance and length. The steel holds a good edge and easily adds a burr with a nice sharpening card. The two sizes come in handy depending on the shape of the bowl I am working on. I couldn't be happier with the selection!
walter hluchyj
Reviewed in Canada on April 20, 2023
These round scraper chisels are very thick and of good quality used them to flatten the bowls that eye have turned would buy them again very good tools
BernO
Reviewed in Australia on May 8, 2022
At half the price of quality chisels, and based on other reviews I thought I would give them a go. I was only buying round side scrapers so figured they didn’t need to be high end. Like others have said, they’re coated with heavy lacquer. I couldn’t find my acetone, so I just started using them with the lacquer still on them. Haha, worked fine, it comes off anyway.
David
Reviewed in Canada on December 7, 2022
Overall these are decent scrapers. I was disappointed that the cutting edges appeared to have been stamped out as the cutting edge was rolled down which required pretty significant grinding to correct. They are beefy and do seem to hold and edge as well as my other M42 HSS tools.
Customer
Reviewed in Canada on August 27, 2021
The 2 Benjamin Best scrapers arrived in a fabric carrying case. They are very heavy duty, quite thick and substantial. So far I have only used one a bit. It sharpened fine and did what I needed. I can think of no negative aspects so far. They were inexpensive, arrived as stated, and look very good.
mike m.
Reviewed in Canada on January 30, 2021
These chisels are of excellent quality and a really good value. A must have for bowl making. Steel is thick and holds an edge wonderfully. I'm very particular with tools and very impressed with these.
PointyHairedBoss
Reviewed in Canada on April 7, 2021
Like many other reviews for this product I found the tools to be good value. I'm glad I read the comments about the lacquer coating on the steel so I was prepared. I built a small immersion tank from some copper pipe scraps so I could soak the tool steel in acetone. I could have used a glass bottle but that would have needed more acetone. It worked like a charm: 20 minutes soaking, no scrubbing then wipe the tool clean. If I'd have only bought 1 tool I would have used elbow grease to remove the lacquer but I also purchased 3 bowl gouges that needed the same treatment so this saved a lot of time & effort. In the 3rd photo you can see how far the tool was immersed - bare steel on the left, lacquer on the right
José Antonio
Reviewed in Mexico on April 3, 2021
Un par de herramientas indispensables para el oficio.Son de buena calidad y me han sido muy útiles.
D. Rhemar
Reviewed in Canada on September 27, 2020
Got what I paid for.As everyone says coated with lacquer that came off with paint stripper also needs to be sharpened and honed..Not expensive and you get HSS M2 Steel. What more does a person want. Will last a long timeI’m sure that there are better ones but not for this price.
Sergei T
Reviewed in Canada on February 27, 2019
These are good quality tools bought at very affordable price. These are my first set of scrapers. I have nothing to compare it with. I re-sharpen my scrapers as soon as I received them. It does the job, it is sturdy and stays sharp long enough. I like it. The lower price makes it very attractive for those artists who are new to the trade.
keith hubbard
Reviewed in the United Kingdom on April 24, 2018
Good value productfor the hobbist
Amanda Huff
Reviewed in Canada on January 18, 2015
Great scrapers. The original grind was a little rough, but it's always a good idea to sharpen a new tool right away anyway. The cutting surface can get pretty aggressive, it takes a little getting used to. I made to belt of my lathe slip a few times.Good steel, keeps an edge for a reasonable amount of time, easy to sharpen. Nice handles too, long for you when you need it but still comfortable to hold closer to the tool rest for when you need control doing fine scraping.
Recommended Products
CA $13.51
CA $ 6 .99 CA $6.99
CA $52.99
CA $ 27 .99 CA $27.99