Your cart is empty.
Your cart is empty.This Reese sway control adapter bracket is for Class III and IV two-inch square ball mounts. Simply remove hitch ball, place adapter bracket on ball shank and reinstall hitch ball. Bracket is reversible for use on road or curbside of trailer. The ball mount platform must be 2-1/2" wide and have a 1" ball hole. The adapter is made of 3/8" thick material and mounts under the hitch ball. When installed, the shank length of the hitch ball must be long enough to allow at least two threads to be visible when the hitch ball is installed and the nut is completely tightened. A hitch ball with an extra long shank may be required.
Customer
Reviewed in Canada on January 15, 2024
đ
Rick
Reviewed in Canada on July 2, 2023
Will not fit all receiver hitches, Reese included. If you hitch is any other make or style, prepare to grind and weld....
DL
Reviewed in Canada on October 5, 2023
Arrived on time. And very good quality as you would expect easy to install and make a world of difference in the trailer. We are using it on an Audi Q5 with a 20 foot travel trailer and it has greatly improved the comfort and ride.
Barry
Reviewed in Canada on April 14, 2023
Product was as advertised and did the job, a little expensive for a small piece of metal!
Don
Reviewed in Canada on August 3, 2022
Installed this so that I could add a trailer sway control arm to my 2000 lb trailer tongue.
Customer 11a
Reviewed in Canada on July 11, 2022
A bit expensive but overall it is worth it. No need to weld
Nick & Steph
Reviewed in Canada on August 4, 2020
Great product and itâs simple to use, itâs nice because in theory you can install it on any hitch but itâs better if you tack weld it in place.Tends to move a little so better with a little weld
K Oberlin
Reviewed in Canada on January 19, 2019
Was easy to install and does as it should to allow using my previous draw bar with the added sway control.
Recommended Products