Your cart is empty.
Your cart is empty.Product Description
Avoid The Famous Death Wobble!
- Eliminates steering flop
- Additional bearing for stability
- Eliminates frame flex
- Prolongs the life of steering components
Fits The Following 4WD Dodge Ram Models:
WILL NOT FIT 2WD and Dodge Ram POWER WAGON Models
- 1994-2001 Dodge Ram 1500
- 1994-2001 Dodge Ram 2500
- 1994-2002 Dodge Ram 3500
Complete With No Drilling or Welding Required!
Experience the AA Ignition Difference!
ASE Certified Technicians
Installing parts on you vehicle can be difficult and we understand. That's why we have certified technicians on staff to assist you with installation or even properly diagnosing your car. Our technicians will even provide the factory repair manual to make installation easier for you.
Strict Quality Control
All of our parts undergo strict quality control not just before shipping but throughout the production process. During each step of production multiple quality control checks are performed to insure each and every part lasts for years to come.
An American Small Business
AA Ignition is a division of GWA Auto Parts and we are proud to be an American Small Business. Located in sunny South Florida and founded by long time car enthusiasts, AA Ignition takes pride in providing quality products at an exceptional value.
Arnold
Reviewed in Canada on May 27, 2024
It really fixed my 2nd gen’s sloppy steering!The difference is day and night! Easy to install, took me approximately 30 min!
Nik
Reviewed in the United States on October 17, 2024
Strong and very useful. Takes away some wiggling in the steering gearbox and will help keep the death wobble at bay.
Bisque
Reviewed in Canada on January 1, 2024
Was easy to install, just leave all the bolts loose until they are all in, then tighten. The description says it fits a 2002 3/4 ton but Amazon's description says it's not compatible. It does. Probably won't work on a half ton. It came a day early and took about 45 minutes to install, I'm not sure it it will help but it certainly won't hurt.
Evan G.
Reviewed in Canada on April 16, 2024
Several issues you may encounter with this kit:-New pitman arm nut "bearing shaft" was undersized for the bearing bore (I used one wrap of a beer-can-shim to fix this)-Included split-ring lock washer is too oversized for the flange on the new pitman arm nut (I reused the OEM lock washer)-Main hole in brace was too rearward even using all the adjustment on the frame mounts. Pitman arm nut was ~0.25mm away from the hole edge (I dremeled a bit of material to give the nut more room)-Bearing would not sit flush on the brace plate due to interference with the pitman arm nut hex. I used 2 washers/side to space the bearing off the plate, but will be fabbing a full spacer plate to match the bearing flange soon.Other than that, the brace works. My steering box sector shaft has play, and this brace tightened up the steering considerably. It's a band-aid fix until I can afford an upgraded box, but I'd also recommend this if you've just installed a reman OEM-type box to improve its longevity.
Phil
Reviewed in Canada on March 24, 2023
The ppl that say it doesn’t fit shouldn’t be working on trucks especially if they are going to be driving them on public roads.Loose fit all bolts then snug everything up equally and it will fit perfectly
Shawn
Reviewed in Canada on January 18, 2023
I installed the product on my 98 Dodge 25004x4 diesel.The product is working Great!!Thank You
R h
Reviewed in the United States on September 25, 2022
It fit perfect was easy to install but like most other people say it didn't line up at the sterring box but instead of making the holes bigger I just looosend the steering box and it moved enough to get the bolts all lined up with out drillingI was surprised how much you can move the steering box
Benitois
Reviewed in Mexico on August 9, 2022
Tuve que modificar las barrenaciones un poco de trabajo no se tiene que ver que sea una RAM 4x4 Standar MEXICANA, pero el efecto deseado se logro mejoro muchísimo la conducción de la camioneta
Joel Ritcey
Reviewed in Canada on August 21, 2022
Fast shipping and fits well . Well built at a good price
Joel
Reviewed in Canada on March 3, 2022
I've put this on a couple of Rams, had to modify the first one a little, but the second one went on out of the box with no problems. Tightened up the steering, great budget friendly upgrade for your older Dodge
Hoff
Reviewed in the United States on August 21, 2021
1996 12V Cummins 2500 4x4Let me start this off by saying, you do get what you pay for. I could not justify spending 200-300 dollars on an aftermarket brace setup, but I started thinking when I saw this unit at this price. After reading the reviews it seems the first rendition of this "copied" aftermarket stabilizer had an issue with alignment of the holes. The one I received had absolutely NO issues bolting up and aligning with my truck. The holes are slotted to allow for slight alignment deviations, so don't be mislead by the bad reviews.To be straight, the bearing and stubshaft assembly are COPIES!! THEY ARE KNOCKOFF IMITATIONS OF QUALITY BEARINGS. This should be KNOWN when buying at this price point. However, the brace itself is very sturdy and plenty adequate for the job at hand, no issues there which is perfect for what I was intending to do.Since this is an imitation of an already designed setup, the original aftermarket QUALITY components fit in place of the crappy knockoff stuff included in the kit. I purchased BD Diesels "Service/Rebuild Kit" for their steering brace. It comes with all new hardware, 2 stub/sector shafts and a quality NSK bearing and housing assembly. All in all, I'm in it less than HALF what the aftermarket units cost by going this route.All in all, with my setup of this brace and the quality BD kit that I used in conjunction with this brace, my steering is incredibly improved, even on a brand new steering box. This is an absolute MUST upgrade for your Dodge steering woes!
Arctichunter
Reviewed in Canada on January 2, 2021
This arrived without instructions; however, it is pretty straight forward and there are YouTube videos regarding this.It fit as it should, no issues. Does it work? It seemed to cure some but not all of the wander. let's face it; it is a 26 year old truck with lots of 4x4 time on rough bush roads...Maybe this is as good as it gets...it is worth the price and the try...
Wes
Reviewed in the United States on June 21, 2020
This is the second time I have installed one of these in my Dodge 2500 diesel 4x4 trucks. A great alternative if you aren't looking to spend a whole lot of cash on one from a well known steering gear reman company in WA. While the red and the head gears are amazing, their brackets aren't any different than this one. They serve the same purpose, fit the same, and function the same. If you are having (or not) steering issues in a 2nd, or 3rd gen Dodge Ram truck, get one of these to eliminate steering wander. The Dodge steering gears are junk, and you're going to be spending money on a new one, so support the effort with this brace. Easy install, and completely worth the money. Don't spend more than you need to on something that serves the same purpose. Just buy this one! Great product, 10/10 would buy again or recommend to others.
Recommended Products
$51.47
$ 21 .59 $21.59