Your cart is empty.
Your cart is empty. This Rotary Knob is made of plastic material, 6mm metal hole, 360 degree turning, a built in screw make it can be adjustable.
James Anthony Phinney
Reviewed in Canada on March 2, 2024
Good construction with brass insert, be careful not to over tighten an strip off the slotted head of the screw
カイコー電子
Reviewed in Japan on October 20, 2024
良いです。
Ted
Reviewed in Canada on July 1, 2023
Would have been so much nicer had they been all white to match my other controls. Was nice to have a set screw to have positive contact with shaft.
Kole McRae
Reviewed in Canada on March 30, 2023
I would assume they fit other Moog synths as well. I tried on my Volca Keys and Volca FM but the knobs are too close together so these don't fit those, just because of spacing.Otherwise high quality, feel good to use. Perfect for the "tune" knob to keep it in tune!
Ambrose Fogarty
Reviewed in Canada on October 10, 2023
I used these for a very specific reason: The tuning knobs on the DFAM are too small to accurately dial in a specific note. Same goes for the tuning knob of the Mavis. I was able to install them, but they're hard to get flush with the body of the synth. If they're not installed level, they will "wobble" as you turn them and you'll encounter friction at a certain point.These work, and there's nothing wrong with the product. But I found push-knobs (these tighten with a small screw) work better. It's just easier to seat them on the stock pot knob.
Jake Fine
Reviewed in Canada on May 12, 2022
I wanted knobs for my airline guitar, and these were perfect. They look great and feel solid!
Romet
Reviewed in Canada on February 1, 2022
Worked well for control knob for baseboard heater.
bryan
Reviewed in the United Kingdom on December 12, 2022
Ok
Robin C.
Reviewed in Canada on January 22, 2022
Hidden in the fine print these knobs are in fact 23mm. The description clearly states that they are 19mm. This is inaccurate and they consequently won't fit my project. They also look like they been kicking around awhile and the silver is pretty beat up. The drilling for the set screw also left a bur inside that needed removing to fit it on the shaft. They were cheap enough to not bother with a return though.
Quidam
Reviewed in Canada on August 23, 2021
Used to replace baseboard heater thermostat knobs. The originals were all brittle, transparent plastic, had no screws and either broke or fell off. These fit perfectly, attach securely and look classic.
カスタマー
Reviewed in Japan on February 14, 2021
マイナスネジで固定するので精密ドライバーが必要です
Luis Alfredo Rivera Acuña
Reviewed in Mexico on September 17, 2020
Los necesitaba para unos pedales DIY que estoy fabricando y la verdad esperaba algo de una calidad inferior... sin embargo, me sorprendieron.
C. Rogers
Reviewed in the United States on June 21, 2016
I get that these are really for pots and such, but their usefulness goes beyond that. My neighbor has a really nice, really old, aged brass rangehood over her stove. Some time ago the original knobs broke off, and someone cannibalized the knobs from one of the window AC units. Well those, being made of only plastic, broke relatively quickly. She asked me to come up with a more permanent solution. I had remembered working with these in the past, and took a chance on them this time. Worked beautifully. The set screw snugged right up to the beveled edge on the switches (light and fan) and work great. Zero play, and the metal interior gives me hope that the heat from the stove won't lead to premature failure as the others did. Cosmetically they don't look too bad either, and a heck of a lot better than the honking grey plastic knobs from the AC unit.The only issue I can foresee for this application? The switch shafts, being made of plastic (nylon?) breaking/snapping with too much force. Time will tell. Either way, the quality is top notch.
Recommended Products
$20.98
$ 10 .79 $10.79