Your cart is empty.
Your cart is empty.Amazon.ca Product Description
Technological advances in today's modern firearms, ammunition and optics have enhanced the potential for long range accuracy. However, precision mounting and alignment of your system's scope is critical to realizing the accuracy. A scope's reticle must be precisely aligned with the weapon to ensure holdover or turret adjustments for bullet drop produce true vertical compensation for point of impact. If the crosshairs are canted left or right both elevation and windage bullet impact error will occur. The Wheeler Professional Reticle Leveling System is a precision tool and technique designed to allow a scope to be perfectly leveled on any firearm with ease. CNC machining, factory adjusted calibration set screws, anodized aluminum construction and protective molded case put this instrument in a class of its own. The system is comprised of two machined aluminum level housings calibrated to their integrated levels. The Barrel Clamp Level is attached to the guns barrel while the smaller Reference Level is placed on scope base, bottom half of a ring or other flat surface perpendicular to the vertical axis of the gun. The gun is then rotated until the Reference Level is aligned. The tuning adjustment knob on the Barrel Clamp Level is then turned until its level is centered to match the Reference Level. At this point the Barrel Clamp Level is calibrated to the guns axis. The Scope can be installed loosely and the Reference Level placed on top of the scopes turret cap. The scope is rotated until the Reference Level is aligned with the Barrel Clamp Level and then simply secured in place. The Wheeler PRLS is the most effective instrument available for precision scope alignment.
From the Manufacturer
The Wheeler Professional Reticle Leveling System is a precision tool and technique designed to allow a scope to be perfectly leveled on any firearm with ease. CNC machining, factory adjusted calibration set screws, anodized aluminum construction and protective molded case put this instrument in a class of its own. The Barrel Clamp Level is attached to the guns barrel while the smaller Reference Level is placed on scope base, bottom half of a ring or other flat surface perpendicular to the vertical axis of the gun. The gun is then rotated until the Reference Level is aligned. The tuning adjustment knob on the Barrel Clamp Level is then turned until its level is centered to match the Reference Level. At this point the Barrel Clamp Level is calibrated to the guns axis. The Scope can be installed loosely and the Reference Level placed on top of the scopes turret cap. The scope is rotated until the Reference Level is aligned with the Barrel Clamp Level and then simply secured in place. The Wheeler PRLS is the most effective instrument available for precision scope alignment.
Jonathan
Reviewed in Canada on March 20, 2025
was excited to get this only to place the little level on a table, check the bubble and simply rotate it 180 degrees and the bubble is moved to one side....i cant touch the adjustment screws because it says its ''factory adjusted'' lol so return it it is!
Mark Wilson
Reviewed in the United Kingdom on February 7, 2025
Setting up my sights could not have been easier. Went back and adjusted all other sights which had been done without using this handy tool.
C
Reviewed in Canada on September 5, 2024
Follow the instructions and your scope will be installed level each and every time.Build quality is excellent. Checked against a known level and it’s calibrated spot on. Takes all the guesswork out of levelling your scope reticle.Buy the expensive one, buy it once and use it a long, long time.
Warren kidney
Reviewed in Canada on July 5, 2024
Awesome product would definitely recommend this product
K
Reviewed in Canada on November 24, 2024
Nice machined pieces. Case is a bit bulky.
Remigi Franquesa García
Reviewed in Spain on August 18, 2022
Producto correcto
Stephen
Reviewed in Canada on March 31, 2021
Got this to install a LPVO on my wife's FX-9, it was easy to use and her optic is perfectly level now. Going to be using this every time I install an optic from now on. Worth it. It's made from sold brass and has a quality construction; that definitely feels like it will last years.
Daniel
Reviewed in Canada on October 31, 2021
Complements scope installation and set up ! Works as advertised !
Customer
Reviewed in Canada on January 7, 2021
Easy to use. Instructions okay go to you tube and watch before you use it may be better. Happy with it for sure
Franz Hotter
Reviewed in Germany on December 13, 2020
Top
JyssHarley
Reviewed in France on April 19, 2020
Le meilleur moyen de mettre à niveau votre lunette. Une fois que vous l'avez essayé, vous n'utiliserez rien d'autre. J'ai beaucoup de niveaux différents mais celui-la fonctionne le mieux.
Cliente
Reviewed in Italy on November 25, 2019
Per ora va benissimo, a me che piace fare le cose da solo l'ho trovato molto utile. Adesso vediamo di provare il risultato.
Powderpiggy
Reviewed in Canada on March 8, 2018
Best way to level your scope. Once you have tried it you will not use anything else. I have lots of different levels but this works the best.
Recommended Products
