Shopping Cart

Your cart is empty.

Your cart is empty.

XTPTFABS Lower Steering Column Bearing Compatible with 1966-1972 1973-1979 Ford Trucks F150 F250 and 1976-1979 Broncos

Free shipping on orders over CA $49.99

CA $26.92

CA $ 12 .99 CA $12.99

In Stock

About this item

  • √【Compatible with】: Lower Steering Column Bearing Perfect For 1973-1979 F-ord Trucks , 1976-1979 F-ord Broncos
  • √【Also compatible with】:Also works for 66-72 Ford Trucks and vintage Ford cars of similar age with minor modifications to the column tube. You will need to drill out three spot welds so that you can remove all parts of the stock bearing, and then my kit can be installed in its place. Please confirm fit by comparing with the dimensions given below.
  • √【Feature】: Fits Right A full 2.125 inch outer diameter for a proper and snug fit in the column tube. 0.75 inch (shaft) inner diameter. 0.625 inch depth. Supplied with three stainless steel 1/4 inch cap screws and tapped mounting holes. This bearing will also work with Steeroids or similar power steering conversion kits for vintage Mustangs.
  • √【High-Quality】: TOUGH 1/8 inch thick Drawn-Over-Mandrel (DOM) steel tubing is precisely cut, deburred, fitted into a jig for perfect concentricity, and MIG welded to the top plate where the bearing itself is secured. The bearing is a precision ground and sealed radial ball bearing. You will not find a stronger combination!
  • √【Note】: This bearing will also work with Steeroids or similar power steering conversion kits for vintage Mustangs.


This is a lower steering column bearing for the following trucks 1978 - 1979 Ford Bronco 1978 - 1979 Ford 2 Wheel Drive trucks (F100 - F350) 1973 Ford 4 Wheel Drive trucks (built after serial number 40,001) 1974 - 1979 Ford 4 Wheel Drive trucks (F100 - F350) Dimensions are 2.115" OD x .75" ID x .902" deep Note : Also works for 66-72 F-ord Trucks and vintage F-ord cars of similar age with minor modifications to the column tube. (Warm tips :You will need to drill out three spot welds so that you can remove all parts of the stock bearing, and then this kit can be installed in its place.) Features: It's machined from a block of aluminum. It will never flex as it's a VERY tight fit. This will replace the most likely broken plastic bearing in your column now. Helps restore smooth steering and eliminated a steering wheel vibration on your truck. Includes stainless mounting hardware for a finished look.


William E. Herbert Jr.
Reviewed in the United States on March 29, 2025
This bearing upgrade worked flawlessly and the install was straight forward
Worked great
Reviewed in Canada on March 24, 2025
As discribed
bronco driver
Reviewed in the United States on April 3, 2025
Excellent part
DJ
Reviewed in the United States on April 2, 2025
Absolutely no complaints so far. Fit the column tube fine.
Miguel angel bautista
Reviewed in Mexico on August 19, 2024
Si es tal cual la pieza y muy útil 100% recomendado!!
Tom Goertzen
Reviewed in Canada on May 19, 2024
I bought this to build a steering column for my 69 f100 using parts from three different columns. It fits perfectly and having a sealed bearing will ensure this part will outlive me and maybe even outlive the truck
jerryh
Reviewed in the United States on December 17, 2024
Fit is perfect. All billet and solid unit. Would recommend and would buy again.
Peter b.
Reviewed in Canada on October 19, 2024
Used for my steering colum on my 73 f100 perfect fit.
Recommended Products

CA $70.13

CA $ 27 .99 CA $27.99

4.7
Select Option

CA $49.07

CA $ 24 .99 CA $24.99

4.6
Select Option

CA $130.37

CA $ 53 .99 CA $53.99

4.7
Select Option