Your cart is empty.
Your cart is empty.Product Description
The YIHUA 959D Digital Hot Air Rework Station SMD Soldering Kit Includes:
1 x YIHUA 959D Hot Air Rework Station
1 x Detachable Hot Air Gun
3 x Hot Air Nozzles
2 x ESD Safe Tweezers
1 x Heat-Resistant Silicone Work Mat
Wider Temperature Range
You can adjust the hot air temperature from 212~932°F (100~500°C) for a broad range of hot air rework projects. At the same time, the wider temperature range offers more flexibility for different rework styles (E.g., high temperature and air volume users, or precise temperature and air volume users.)
Detachable Hot Air Gun
The hot air gun is now detachable for easier replacement, you can simply swap out the hot air gun instead of soldering a new heating element onto the gun.
NOTE: Heating elements are a consumable part for heating products, once the heating element reaches the rated lifespan, replacement will be required.
Durable Front Panel
The front panel is made of brushed aluminum, making it less receptive to damages that can occur when you make a mistake (For example, shaking hot solder onto the panel) when soldering.
stephen m. jacobson
Reviewed in the United States on March 16, 2025
Works great, I usually avoid Asian tools at all costs but I had zero issues so far and it works great.
customer
Reviewed in the United States on March 16, 2025
Works well. I have had the heater for a while now and used it on heat shrink and to disassemble a couple of circuit boards. It heats and cools quickly and is easy to use. No complex menu.
Howard
Reviewed in the United States on January 28, 2025
It worked perfectly. I’ve only used it once but I suspect from other reviewers it will continue to give me good service.When you put the handheld unit into the cradle it automatically cools down and then turns off the heating element and blower.I used it to remove a surface mounted 2sc1972 transistor and it took about five or 10 seconds and it was done with zero damage.If you use something other than a hot air Rework unit you would definitely risk printed circuit board damage.It has three presets which are actually pre-programmed for the three most useful heat settings which I would’ve programmed anyway so that was perfect.The beauty of this is I was able to heat all three tabs of the transistor simultaneously.The instructions were also actually good.It came with 4 nozzles two tweezers and a wire device for removing more sensitive surface mount components.I’m very satisfied with the build quality and I look forward to using this for many years… If any issues come up I will update my review but for right now I couldn’t be happier.
Extechie
Reviewed in the United States on July 31, 2024
I will admit that this is my first hot air solder tool. For all my adult life I have gotten by with low wattage fine tip pencil irons to build and repair electronics. However there is no getting around the fact that a pencil iron is like a sledge hammer used to set a thumbtack when it comes to the incredibly small and densely packed SMT solder pads and parts these days. And forget removing a high density IC, especially those with heat transfer pads on the back.This gun, with the help of a couple helpful youtube videos on technique has allowed me to to build and repair PCBs that I would not even try before I had it.The build quality is first rate. The feel of the tool in hand is excellent. The range of temperature and air volume control offered seems right for my needs. It heats up quickly, and both the heat and air volume capability is well beyond anything I am currently needing to remove even the largest LSI. The wand stays cool in hand and the selection of air tips lets me control how concentrated I want the heat, depending on the size of the part. Having the option of saving 3 temp profiles is very handy when moving between part sizes and/or solder melt temps.I practiced removing large chips, small chips and individual small components using the PCBs from a couple dead HDD. I also used them to re-prep pads and install these parts. I was quickly able to dial in the temp and air settings to easily remove, clean and install all the parts without lifting or damaging solder pads, although I would bet most of parts I removed are overbaked at this point because of the time I spent heating and reheating them...I am delighted with this purchase. I have found myself taking parts off dead PCB's just for fun (and more practice).
Alex
Reviewed in Canada on January 15, 2024
Have no issues with it so far works as expected. Sometimes the auto off function doesn't work correctly.
Customer
Reviewed in Canada on April 16, 2024
Product dead after second use. Doesn't even turn on now. Not happy.
jorge
Reviewed in Mexico on January 15, 2023
Esta bueno solo que no apaga automatico
Recommended Products