Your cart is empty.
Your cart is empty.Product Description
Specification:
The two-way pump controller has 6 common functions, and the functions can be set arbitrarily to meet more application needs; it can control 2 way solenoid valves, water pumps, motors, light strips, etc.
Key Settings Description:
Power display "----" that access to standby;
Press the first time K1, the screen shows: P-1: K2 and K3 adjustment mode
Press the second time K1, the screen shows: A001: K2 and K3 adjust the first time A, K4 adjust the decimal point (time unit)
Press the third time K1, the screen shows: B001: K2 and K3 adjust the second time B, K4 adjust the decimal point (time unit)
Press the fourth time K1, the screen shows: C001: K2 and K3 adjust the third time C, K4 adjust the decimal point (time unit)
Press the fifth K1, display "----" that entered the standby state;
For example; need to set the mode: P - 2; time: A010 B005 C006:
Indicating the second mode of operation; after the signal 1; relay 1 after 10 seconds to start off; relay 2 to give the signal after delay 5 seconds after the start 1 second automatically shut down
Model:YYB-5
Input voltage: DC/ AC 7V~27V
Time range: 0.1 seconds to 999 minutes
Weight: Approx.103g/3.6oz
Wiring port Description:
1. AC/DC : Input 7V~27V
2. IN1: Signal input 1 (negative trigger)
3. IN2: Signal input terminal 2 (negative trigger)
4. IN3: Signal input 3 (negative trigger)
5. NO: relay normally open interface, relay pull before the suspension, after the connection with the COM shorted
6. COM: relay common interface
7. NC: relay normally closed interface, the relay before the connection with the COM shorted, pull after the suspension
Function list:
P - 1: to signal 1, relay 1 pulls to A time automatically stops; to signal 2, relay 2 pulls to B time automatically stops; signal 3 is emergency stop reset signal
P - 2: signal 1, relay 1 is pulled to A time automatically stop; relay 2 from the signal to start delay B time after the suction to C time automatically stop (this function time unit needs to be consistent)
P - 3: After power on, relay 1 pulls up to A time release, waiting for C time, relay 2 pulls to B time release, waits for C time; relay 1,2 turns endless operation endless cycle
(If the control motor is reversible can be understood as: the motor is running a period of time; stop for some time; automatically reverse for some time; stop for some time; then automatically forward;
P - 4: to signal 1, relay 1 pull; to signal 2 (limit), relay 1 stops and starts counting to A time relay 2 pull; to signal 3 (limit), relay 2 stops and starts timing To B time relay 1 pull; infinite loop
(If the control motor is reversible can be understood as: press the start button 1; the motor is moving to the limit 2 to stop for a period of time; automatically reverse to the limit 3 to stop a period of time; then automatically forward;
P - 5: to signal 1, relay 1 pull; to signal 2 (limit), relay 1 stop and start timing to A time relay 2 pull; give signal 3 (limit), relay 2 stop; Signal 1; once again
(If the control motor is reversible can be understood as: press the start button 1; the motor is moving to the limit 2 to stop for a period of time; automatically reverse to the limit 3 stop; give the signal 1;
P-6: to signal 1, relay 1 pull; to signal 2 (limit), relay 1 stop; give signal 1, relay 2 pull; to signal 3 (limit), relay 2 stop;
(If the control motor is reversible can be understood as: press the start button 1; go to the limit 2 stop; press the start button 1 again; reverse to the limit 3 stop;
If the remote control function: remote control A key and B key to start the above function; C key press the relay 1 work (forward); then press the relay 1 to stop (stop); D key press the relay 2 work (reverse); Press once relay 2 to stop (stop);
Christie
Reviewed in Canada on July 22, 2024
I have a power wheels car that has 2 12v motors will this work for it ? Terrible instructions so 1 star for now
Neil
Reviewed in the United States on November 3, 2024
Does what is intended
william bican
Reviewed in the United States on November 11, 2024
Should come with instructions
GML
Reviewed in Canada on April 25, 2024
The media could not be loaded.
Mad Scientist
Reviewed in the United States on June 4, 2023
Haven't used it for anything yet as I'm not able to make any sense of the "instructions", which are a riddle wrapped in a mystery inside an enigma. If I could get some tech support, this board will extend and retract a linear actuator. Hey seller! Please be in touch! Thank you!
Beth A Kleckler
Reviewed in the United States on October 16, 2023
I GOT THE ITEM, THATS ALL. NO INSTRUCTION OR A POINT OF CONTACT FOR INSTRUCTIONS.
James Bliehall
Reviewed in the United States on December 5, 2022
I had issues trying to understand the firmware programming. 1 email to tech support solved my problem. I use this device to control the motor drive on a very precision target positioning system for the military. It has worked flawlessly for over a month. They are (I hope) upgrading/revising the programming instructions.DO NOT let the low-cost frighten you away! This is a quality product.
Elaine Lanoue
Reviewed in Canada on January 23, 2022
works exactly as it should, perfect
Recommended Products