Your cart is empty.
Your cart is empty.Product Description
Product Features
The hot air handle and the electric soldering iron are independently plugged and switched, each other is independent, easy to replace, large double screen blue highlight display, double digital display button temperature adjustment, accurate setting and control temperature + 1°C, temperature adjustment range from 100°C to 480°C (212°F-896°F), temperature tolerance is + 2° C.
Large capacity hot air gun, heating quickly, gentle and big wind, suitable for lead and lead-free work. The most scientific and fashionable two-in-one design, equipped with high quality ABS plastic shell, the machine is compact and durable.
The whole machine adopts anti-static design, effectively eliminates the damage of SMD components. It also has the function of fault self-detection and fault warning.
The product adopts large screen, blue highlight, double digital display button, temperature adjustment, which can display accurate temperature.
Please work in strict accordance with the instruction manual and procedures.
make sure Please that the heat gun should be close to the bracket before turning on the machine to achieve the effect of induction.
Please note that
Before starting the machine, make sure that the power cord is firmly connected to the machine until it can be powered on normally. The machine can work normally only when it is normally powered on.
Induction system
The handle of hot air gun is an induction system. After the machine is connected to the power supply, make sure that the handle of hot air is placed on the bracket before opening. Then turn on the independent switch of the hot air gun, and pick up the handle to enter the working state.
Design of independent switch
Connect the Soldering iron handle and the hot air gun handle with the corresponding interface. After the power is turned on, turn on the corresponding independent switch and pick up the handle to enter the working state.
auxiliary Accessories
- 1 x soldering iron clean ball
- 3 x anti-static tweezers
- 1 x IC puller
- 1 x fly line、 1 x 50g solder wire
- 1 x suction tin wire、
- 10x tip
Safety advice
！The voltage of this product is 100-120v 60Hz.
！Please make sure to use the corresponding voltage at your address. If according to the abnormal voltage, it will cause damage to the Soldering station, or the components in the machine will burst due to the high voltage.
！In order to ensure your personal safety, please turn off the main power switch and unplug the power cord After work.
！Make sure to place all parts after they have cooled down.
MYPOUOS 2 in 1 Soldering station of Packing list
Standard configuration
1 x 8588D 2 in 1 Soldering Station
1 x Soldering iron handle
1 x hot air gun handle
4 nozzles ;1 x connecting line
1 x bracket ;1 x manual
Services provided
If you encounter any problems when you receive the goods, We are very happy to solve it for you .
Megan
Reviewed in Canada on March 4, 2025
It’s perfect
Mister MPR
Reviewed in the United States on February 16, 2025
I think that there are better units out there but for the price of this one I think you'd be hard pressed to find a better performing combo. It heats up fast and has lasted me for quite awhile using it almost weekly for about a year now. I'm just a hobbyist and not a professional but I am generally pleased with the ease of use this things has provided me. Straight forward and easy to use. Much better than your regular old soldiering iron. The hot air gun comes in clutch especially when trying to desolder components from a pcb.
Cobretti
Reviewed in Canada on February 1, 2025
I have had this product since July 2023 and it has held up very well. Meets my DIY needs fully.
David Wahl
Reviewed in the United States on January 10, 2025
I bought this soldering iron as a gift. I already own a soldering/de-soldering station of the same type which I like very well.
larry hardiman
Reviewed in Canada on August 14, 2024
Preformed perfectIt's perfect
Ben Anonymous
Reviewed in Canada on November 13, 2024
This thing is well beyond my expectations and the only thing I can think of that I didn’t like was the soldering iron included a nice high end black and silver tip, but the additional included tips are just cheap chrome ones that never work unless you wear the coating down first. That’s basically it. It’s perfect, I just wish there was some better quality additional tips included but for the price of this entire unit, I’m not even mad.
Jathuron
Reviewed in the United States on July 13, 2023
I got this in because my old setup is getting outdated. I had this item for almost 2 months before I opened it. Once I did it happen to be when I needed it the most for an emergency. Well when I opened I was really impressed with the features and adjustments for the solder & the heat gun. Well needless to say the solder iron did not work. SO I had to order another iron and this one is a 6 point connector which made it a little more difficult to find but I did and it works. So the good thing about this is that I know I can always have another iron brand work with this station.I am only giving a lower rating based on the iron did not work right out of the box and had to be replace. I am very happy with it's performance so far. Good value and I recommend this item.
BrianE
Reviewed in the United States on July 5, 2022
I was skeptical at first when looking for a decent soldering station for my auto shop to replace BMW MOSFETTS in the engine computers. First off it was packaged really well with no broken or missing pieces. Second, it was easy for the tech to operate and use this station for the first time and it went very well. I have spend hundreds on well known name brand setups that were over complicated, difficult to maintain heat ranges and were bulky. Definitely a must for those who are starting out with electronic components.
Rémi
Reviewed in Canada on February 18, 2022
I used it for soldering 1206-0805-0603-0402 Resistor/Capacitor and some smd ic (Gikfun Ek7028).Pos: Fast heating, easy to use. Automatic start/stop of heat gun with inductive sensor where you let it rest. You can solder with precision with the angular tip.Con: The arrows to control the temp are opposed (Up-Down iron, Down-Up heat gun).I don't know if the tip will last long, but when im done i put solder on it and i use the brass wool to remove excess to avoid oxydation.
MunkPuppy
Reviewed in Canada on March 7, 2021
UPDATE: The heat gun has stopped working, and I am as yet unable to contact support.***The device itself is great; the iron and reflow gun heat up quickly, hold their temperature, and perform flawlessly thus far. My Only complaint with it is that the blue number displays aren't tinted, and are very hard to read in direct light. I suggest tinted display windows, or using a different colour for the display; blue was not a good choice. EDIT: I 3D printed a single 0.3mm layer of black TPU 37.5mm x 19.5mm, and they stick on with static. It makes the screen completely readable! See attached photo.Unfortunately, and expectedly, the accessories that come in the package are mostly garbage. The desoldering wick is aluminum or steel, is very rigid, and doesn't work very well. The "copper" scrubbing puff is just as bad. The soldering tips are pretty useless as well; one of the angles tips was burned up after a couple of hours. There is a tiny little box containing what appears to be yellow broken glass, but it's not sharp. It might be some kind of resin, but I don't read Mandarin or Cantonese. It's kind of hard to mess up tweezers, so they get a pass. But the tiny amount of leaded solder, and pretty much all of the accessories are crap.Again, the reworking station itself works very well, just don't expect anything else in the package to be any good.
Peter
Reviewed in Canada on December 25, 2020
This is a very tidy little unit that works well as advertised. It is perfect for occasional use in a home shop but it likely won't stand up to daily commercial use.Plusses:- Individual temp readouts and on/off switches for iron and air gun- Reasonably high power/effectiveness (iron can heat decent loads and gets up to temp quickly from idle- Kit is complete with everything you *need* for low volume soldering and reworking and then some.- Cooldown with power off works properly. This is rare IMO. Note that there is no "master power" on the mains. Please plug this into a switched power bar and remember to turn it off once the unit has cooled down and you are not going to be using it for a while!Minuses (i.e. why it isn't suitable for constant use by a pro):- No apparent way to disable sleep mode on the iron (odd IMO)- Iron pen handle is very basic and all plastic. I just know it is eventually going to fail where the tip holder threads on. No insulating collar.- I suspect the displayed temperatures are quite inaccurate (low) but I have not confirmed this except by experience.- Tips (many!), tweezers, supplies are all pretty basic and made of weak/cheap materials so you'll want to replace the ones that you actually use (but it is nice to have the assortment on day one)For occasional work, it will do the job well and is a bargain for the money. I'm very happy.
Justin
Reviewed in Canada on December 18, 2020
So I ordered a 858D from somewhere else on Amazon and honestly it was pretty poor, this however is pretty alright, not perfect but more than usable.I've opened up ever part of the unit and inspected it, and I'm happy enough with it, everything is wired up right and grounded out so a set up from the 858D I had returned.The heat gun itself uses a ceramic core, so it's more consistent than a Mica core on a cheaper unit, it is grounded out with the wire being soldered to the very top end where it's cool, I'd have liked to have seen a tab where it's terminated so when you replace the core you can just take the whole enclosure for the core out.If you have a rattling fan it's just misaligned open it up and put the fan and grommet in the top part that has no PCB and put it back in place, my fan did not rattle before I took it apart to inspect, so it's an installation error.The soldering iron is a lot better than I was expecting, I have a KSGER 12T 3.1S on that way, but it won't be here for a while due to Canada post being slow as possible, so it's nice to have an iron in the meanwhile so I don't have to use my horrible old one.It heats up fast around 10 seconds or so to usable so pretty good, all the tips are cheap but useful, dirt cheap to replace over T12 tips even if those are far better but still a good AUX Iron.When you get your unit to NEED to calibrate it with a temperature probe using the pots inside the unit on the face plate.If you need to calibrate your probe just use rolling boiling water since it's more or less 100C always, The hot air gun is pretty easy to set but if you don't have a soldering iron probe it may be a pain to do, but it's worth the effort, it may take you an hour to set your calibration.The unit itself is nice enough, cheap in the way it's ABS plastic but in other ways very nice to use, If you intend to use this for long amounts of time and constantly all day I'd consider adding in a Fan inside the unit to cool the transformer.
Dabibble
Reviewed in the United States on April 11, 2020
The iron and hot air both heat up very quickly.There's a safety feature on the air that it won't turn on if it's been removed from the holder. If you turn it on it starts the hot air as soon as it's picked up, if it's turned on with it out of the holder it won't start until it's placed in the holder and removed again.Once the hot air is no turned off and placed back in the holder it stops heating and runs the fan until it's cooled off, very nice touch.I appreciate knowing safety was a concern when it was engineered.The only thing I don't like is the display blinks periodically when the machine is off. I suppose it's not a terrible feature, just sort of reminds me of an old video arcade game trying to lure me over to play with it, at least it doesn't play 8 bit music to get my attention.
Recommended Products