Your cart is empty.
Your cart is empty.Product Description
Facmogu Solid Maple Guitar Bridge Clamp, Entry Level Bridge Clamp Acoustic Luthier Tools with Cork Gasket & L-Wrench
- This bridge clamping tool looks to be strong and well made. Come with an Allen key for the alignment bolts to help tighten up everything in the glue-up.
- Keep in mind that you only clamping a wooden bridge to a thin wooden sound board. You don't need a few thousand pounds of pressure to clamp a guitar bridge to a guitar so you should be fine with this tool. You should have more than enough pressure to clamp the bridge to the guitar.
- You should have a successful installation provided you did all your prep work correctly and are using the right glue.
Easy Installation & Operation:
- Remove old bridge and clean off old glue
- Re-glue bridge to guitar
- Place 2 bolts from inside guitar, through the peg holes
- Place bridge clamp on top of bridge
- Screw tight and wipe away excess glue
- Allow to dry for 24 hours before removing clamp
Note:
- The only part of the clamp that can can possibly come in contact with the glue during the drying process is the 2 bolts that go through the body on the inside, in the event that this happens simply remove the rest of the clamp and heat up the 2 bolts till they come loose.
Package Content:
- 1 x Guitar bridge clamp
- 2 x Cork Gasket
- 1 x L- wrench
James
Reviewed in Canada on March 1, 2025
worked very well
Grant
Reviewed in Canada on February 26, 2025
I Gerry rigged something until I found this one! It's pretty decent and has given me good results. Should include wider washers though. Could help, but not really fussed
Prairie Girl86
Reviewed in Canada on February 22, 2025
Easy to use & did the job beautifully. This was so much easier than trying to manipulate the long throat clamps through the sound hole.
rural ontario
Reviewed in Canada on February 19, 2025
well built/designed.fits and seems to clamp things in place like it should .no complaints so far.
Michael F.
Reviewed in the United States on January 22, 2025
It was made very well and worked fine.
Ryan
Reviewed in Canada on August 25, 2024
Save so much BS with special clamps, etc., perfect for repaires. Used Brown Glue from Lee Valley...no issues. Hot hide glue is best...
Actionman
Reviewed in Canada on August 23, 2024
Easy to use and well designed product.A must have in any repair shop.
Spencer
Reviewed in the United States on July 16, 2024
I really like the durability left his clamp as well as how easy it is to use. This is my first time researching a broken bridge, but the clamp was self explanatory!There are more expensive versions that I could have bought, but this being made of maple. I thought there would be less chances of receiving additional scuffs on the guitar.I like the clamp and would recommend it!!!
Jon C.
Reviewed in Canada on December 13, 2024
I needed to fix up an old guitar. This was very cheap to buy, and worked perfectly. It does hold things very tight and it's exactly what I needed to save an old guitar. Well worth the money.
Michael Heron
Reviewed in Canada on December 11, 2024
Did the job find. Seems fairly durable.
Demetrios
Reviewed in the United States on November 18, 2024
It made the job of clamping the bridge down a lot easier than just trying to position c-clamps. It worked exactly as advertised, I had no problems with the fit, and it was a great value for the price.
Boston
Reviewed in the United States on January 15, 2024
Well designed with high-quality construction and hardware. Simple to use and clamps well without additional external clamps. The side screws do a good job holding down the ends of the bridge. I inverted the main screws due to a small sound hole and big hands and had no problem tightening the wingnuts; solved a bit of screw turn with needle nose pliers when needed. I would recommend large washers both sides to distribute the clamping forces. No need for the high-priced items from luthier supply houses IMO.
SS
Reviewed in the United States on September 20, 2023
I’m a novice at guitar repair so I thought this bridge clamp would be accurate and save a lot of time. In my case the metal bolts barely fit through the bridge holes so I needed to use a Allen wrench to screw then up and then back down. And then when I got it all ready to screw in the top pressure plate the spacing was off and it would not fit. I had used the low and high E string holes. So I had to unscrew everything and move the bolt from the low e string hole to the next hole. I thought it would be a 10 minute job but it took about 2 hours. But the result is great. Strong bond. No gaps. So I’m not complaining. I got a $500 guitar for $100 because the bridge was totally busted and for a $16 bridge, this clamp, some material and 3-4 total hours of time I have a very nice guitar! I’d definitely buy it but I would recommend screwing everything together without glue first to make sure you know how everything fits on your instrument. Just take your time.
Recommended Products
CA $9.99
CA $ 4 .99 CA $4.99
CA $9.99
CA $ 4 .99 CA $4.99
CA $13.22
CA $ 5 .99 CA $5.99