Massih Kheiry
Reviewed in Canada on March 29, 2025
Never buy Open Box with this socket. Bent pins.
Jesus Orejarena
Reviewed in the United States on March 21, 2025
La placa es mala, tengo dos computadoras con la misma placa y se dañaron a los 3 meses, una no encendio más ni siquiera los ventiladores y la otra enciende los ventiladores pero no da video, y ya he revisado mil cosas, foros, blogs, tutoriales y nada funciona para arreglarlas y probé todos los otros componentes en otra PC y funcionan el problema es la tarjeta madre. Para nada la recomiendo
_Shopper
Reviewed in the United States on August 11, 2024
Bought a few times for budget and mid range computer builds and they never failed me after several months of use.Pro 1: Q-Flash! Why don’t all manufacturers make their own for all boards? The ability to flash the BIOS with just the PSU and a USB drive.Pro 2: The features on this board. Q-Flash. No screw NVMe latch. ARGB headers. Full CPU support. Some boards in this price range only support 65 watt or less CPU’s.Pro Tip: This is a budget board. You will degrade the board in time with overclocking.Would I buy it again? Yes.
Cesar
Reviewed in Mexico on July 17, 2024
Sirve perfectamente para procesadores AMD Ryzen de séptima generación, solo que cuando le pones de octava generación tienes que actualizar primero el bios al nivel 3 para que funcione con esta generación (8)
Joe
Reviewed in the United States on June 13, 2024
This is important information because Gigabyte has completely useless customer service and lacks the foresight to put any pertinent information on their website.If you're buying this motherboard to use with your 8000 series Ryzen processor, it does not come with the right BIOS installed, you have to get an 8-16GB USB 2.0 thumb drive, format it to FAT32, and download either the F20 or the F30 drivers from their website(or any of the drivers in between)And THEN, you have to unzip the folder into the usb 2.0 drive and rename the A620MS2H.F30 to gigabyte.bin (This is really important, it just won't work unless you do this and I don't know why this isn't in the readme.)And THEN you have to connect the 8 pin and the 20 pin to the board (you can do it with the board populated or bare, it really doesn't matter as long as the board has power) and then you put the USB 2.0 drive into the slot marked "BIOS" you might need to check the orientation to find it,and THEN you hit the Q Flash Plus button and wait for the entire thing to stop blinking, it takes 5-6 minutes.You should be able to get it working with these instructions. OR, you can spend an entire week in an email loop with Gigabyte's customer service as they walk you in circles.
fahdoujaa
Reviewed in Canada on May 24, 2024
I received a board that was dead on arrival now i have to send it back and it was a huge waste of time to get it just to find out that it wasn't working
carmen
Reviewed in Mexico on January 31, 2024
Todo muy bien