Your cart is empty.
Your cart is empty. Package contents:
1 x Set PCBA Adapter.
3x M2 Screw
1x M2 Screwdriver
Bronson Lavay
Reviewed in Canada on March 6, 2025
Worked great for my needs. I installed a full-size 2TB M.2 2280 NVME SSD into my ROG Ally (Z1 Extreme). It runs a little close to some of the other components so a little bit of shimmy-ing was required to get the placement correct.Not a fault of the product but be careful re-assembling after installing. I didn't have everything aligned/tightened as I should have and ended up with a bulge on the back of my ROG Ally (Not where the SSD was installed). This was causing some odd issues with intermittent shut-downs. After I opened it up and ensured everything was put back correctly I haven't had any problems. Learn from my mistakes.
Sameer
Reviewed in Canada on January 18, 2025
Just installed it on my asus rog ally and it works great
Rav
Reviewed in Canada on January 1, 2025
The screw made a bump( warped back panel upon putting the panel back) but it’s not very noticeable. It works.
Jamie
Reviewed in Canada on September 16, 2024
It's a snug fit but this works great for the ally. Still getting full speed from the drive.
Robbie
Reviewed in Canada on August 30, 2024
Install was easy and have no issues.
George Walker
Reviewed in Canada on July 14, 2024
Confirmed working with the ROG Ally and a PCIE-4 2TB SSD. So far I am very happy with it.
Neostad
Reviewed in Canada on June 14, 2024
Install was fairly easy and works perfectly. The drive sits in there a bit crooked, but that's due to the Rog Ally, not the bracket itself. Would buy again.
Matt McFeely
Reviewed in Canada on March 6, 2024
Plugged it in with a 2280 I know works. Rog never saw the drive. Put back my 2230 it worked and booted. Put back in the adapter and then the 2230 and locked it down. Still didn't work. Put back in the 2280 and still no good. Pit the 2280 in my m2 enclosure and it worked same for my 2230.Bottom line the adapter didn't work. I returned it.
Recommended Products