Your cart is empty.
Your cart is empty.Product Description
Replace your Old or Broken Remote Key Fob for Less
An inexpensive replacement for your original remote key fob, this Keyless2Go car key replacement is compatible with a wide range of vehicles from Chrysler, Dodge, and Jeep vehicles. Each fob key has been pre-tested to ensure functionality and that signals are transmitting properly. The keyless remote key is self-programmable if you already have 2 working original keys that start the engine. The key blade will need to be cut by a qualified locksmith or dealer. Every remote key fob comes complete with batteries and free tech support to help troubleshoot. To ensure this replacement key fob will work with your vehicle, your existing remote key must be FCC ID: OHT692427AA or OHT692713AA.
Compatible with:
2007-2018 Jeep Wrangler
2010-2018 Jeep Patriot
2007-2018 Jeep Compass
2007-2012 Dodge Caliber
2007-2011 Dodge Nitro
2007-2009 Chrysler Aspen
2008-2011 Dodge Dakota
2007-2009 Dodge Durango
2007-2009 Dodge Ram
How to Program your Keyless2Go Key Fob Replacement:
1. Insert first original working key into the ignition and turn ignition switch to ON. Wait for approximately 3 seconds then turn ignition to OFF and remove key.
2. Within 15 seconds of removing first key insert second original working key into ignition and turn ignition switch to ON. Wait approximately 10 seconds. You will see the immobilizer warning lamp illuminate on the dash and you will hear an audible tone.Turn ignition OFF and remove the key.
3. Within 50 seconds insert the new unprogrammed key into ignition. Turn ignition switch to ON. After approximately 10 seconds you should hear an audible tone and the immobilizer lamp will remain illuminated for 3 seconds. Once this occurs programming iscompleted.
4. For each additional key you must repeat these steps starting with step number 1.
Eddy Aragon
Reviewed in the United States on February 7, 2025
Es exactamente la llave de auto que necesitaba, se pudo programar bien y funciona muy bien.
Andre Duplessis
Reviewed in Canada on February 18, 2025
Got this key fast and got the job done cheaper than the jeep dealer đ
Scypheroth
Reviewed in Canada on January 1, 2025
Received my key and frankly i was very impressed with the quality of the fob. The fitment and feel of the key itself is on par if not better than the OEM that costs literally 3x the price...only thing its missing is the Brand logo on the back but that isnt a issue at all for me...Key cut fine and programmed perfect, tho i did not use the cloning method instead i chose to have it programmed by my local dealership and it took the OEM program fine.Buttons are firm and responsive, the only issue i had was the 20323 battery inside the fob was weak so i had to replace it but other than that it functioned perfect! I will be buying another one in the future!
Customer
Reviewed in Canada on April 15, 2025
Excellent keys and easy to program as per instructions.
P.Q
Reviewed in the United States on June 27, 2024
Ok I ordered these several times as a lot of people mentioned that the engine start doesnât work its either the fob it faulty or the person conecting the fob is not a good knowledgeable person. First person I took fobs to the engine start didnât work the second person i took fobs to the engine start works !
Aleighđ
Reviewed in Canada on June 2, 2024
Had the key blank cut for $5 at my local locksmith. Just swapped the transmitter from my broken key into this one to avoid programming at the dealership.
nigel uglow
Reviewed in Canada on February 19, 2024
As described, took it to my local Jeep dealer and they cut and programmed the key. I only had the one key so needed it programmed. Works perfect
Ragnar
Reviewed in Canada on December 14, 2024
I lost my spare key for my 2010 Jeep a few weeks. After I found it I decided to get 2 more made, so I ordered two of these. As long as you have two working keys , these replacements ones work perfectly. 1) you need to get a locksmith to cut the key to match your working key (cost me $24/can to cut two keys). 2) follow the easy programming guild that comes with it, there are also some good Youtube videos showing how to do it.
Brian
Reviewed in Canada on July 16, 2023
Have the original two key fobâs. Cannot program the new one as per instructions. Have checked the fob batteries, tried many times following instructions closely and searched online for troubleshooting with no success. Useless key fob that is cut to the vehicle and cannot be returned. Donât cheap out like I did, save your money and frustration buying from a different vendor. 2014 Jeep Patriot.
TW B.
Reviewed in Canada on April 7, 2023
Was able to program key with JScan fine, the only problem I'm having is that the remote start button does not work very well... I have to press extremely hard to get it to work. It's the same problem with both fobs that I ordered. I am about to try some conductive paint in the plastic 'bubble' above the contacts inside the fob to see if it will make a better connection when pressing the button. Not sure if this is a common problem. Other than that, I'm happy to have spare keys again.
David Nathanson
Reviewed in the United States on June 28, 2022
This key works exactly as well as the factory key does. You do need to know a couple of things to make it work for you.After a locksmith cuts the key to match your car/truck/Jeep you still need to program the key to the car so it can start the engine & so the alarm buttons work. Your locksmith can do that. But probably so can you!Check your owners manual for how to program a new key. It's sort of a lot of steps but you don't need any special tools.Or buy a couple of items & gain even more power. If you have a Jeep, get the JScan ODB app from Jscan dot net. It's great & a lot of fun too. Check their website for all it can do & which Bluetooth ODB thingy to buy. I used JScan & iCar bt to program the keys, & also as a bonus- change some Jeep preferences.Anyway, if you have good info this is a good key. Works great, No problem.
Horsethief
Reviewed in the United States on January 16, 2020
Batteries Plus screwed up the cutting of the key, could not handle it. Had to take to locksmith he replaced key and cut great. Programing easy Batteries Plus wanted $60 to do. They attempted to cut but could not then gave back to me saying still could be used, wrong.
Linda W
Reviewed in the United States on December 6, 2018
We took this key fob into the locksmith today to be cut and programmed. He had no problem with this key fob. You will need your pin code for your Jeep that you get from the dealer to have them program this key if you don't have it. If you already have two working key fobs, you can buy a third key fob and program it yourself, saving you the programming fee. The dealers change a lot for this so shop around. It's only about $3 to cut it and can range from $80-$120 to program it. I called around and this is what it cost. Luckily, the locksmith gave us a discount and it was $61 with tax. I plan on buying another one and will have him cut it so we have a backup in case we need it. I can program this one on my own.Anyway, this key fob worked great with all functions! Like I said, I will be buying another one.
Recommended Products
CA $4.69
CA $ 1 .99 CA $1.99