Your cart is empty.
Your cart is empty.The Decora Smart Z-Wave 4-Speed Fan Controller allows you to select one of 4 fan speeds or control your overhead pull-chain paddle fan when paired with a compatible Z-Wave controller. Adjust fan speed from max, high, medium, low, and off using the third-party hub’s app, schedules, or voice control with a Z-Wave hub. Uses 700-Series Chipset which offers S2 security and is enabled with SmartStart. Utilize DD00R for 3-way installations.
Timothy K.
Reviewed in the United States on January 2, 2025
I’ve gone through two GE JASCO fan controllers in just two years and decided to give this unit a try instead. It paired up to my Home Assistsnt instance without issue and extended well to my HomeLink bridge.I like the increased levels of fan speed and so far it works great with my setup. Hoping it lasts more than a year!
Customer
Reviewed in the United States on July 14, 2024
I've used a few different Zwave Fan controllers for my house and this is now my go to device. I've used Jasco/GE Fan Controller (58433) and the Homeseer (HS-FC209+) which both failed in under a year. I have two of these and they have been running with no issues for approximately 2 years now. I also love having a separate speed control on the switch which makes it so much easier to control the speed then pressing and holding the up or down paddle.I have integrated this into SmartThings and into Home Assistant with no issues. I can use my SmartThings, Home Assistant, or Google/Alexa to control the fan and the speed without touching the switch.My only gripe with the switch is the inability to control the lights on the switch. I would love to be able to reassign the speed indicator, which lights up green, with notifications such as garage door left open or back door left unlocked (Homeseer allowed this to be programmed).With the limited Zwave fan controllers I would buy this again if I need another one.
Chathan Driehuys
Reviewed in the United States on May 11, 2024
The fan controller works great. It connected perfectly to my Z-wave network, and I can control it exactly as I expect to.The switches are an absolute pain to install though. For starters, they use individual wire nuts for each connection. This takes up a ton of space in the wall box which makes it very difficult to stuff everything back inside. This is especially problematic in a 2 or 3 gang box with wires for other switches. Compare this to other switches like the Enbrighten Z-wave ones which use screw terminals, and it's a night and day difference. Finally, the included connection wires are super flexible stranded wire that just never seem to make a confidence-inspiring connection to the existing solid core wire in my house.Despite the controllers working flawlessly, I would definitely look at other options before considering these fan controllers again.
Waslost1
Reviewed in the United States on December 11, 2024
This switch replaces a GE/Jasco switch that died after a power flicker. Seems all my GE/Jasco switches are having this issue after a few years so I figured I would try the Leviton brand to see if it holds up any better. Time will tell, but the current rating is high because of several factors. The first is that this switch has pigtails rather than screw terminals. The stranded wires are much easier to tuck up inside the electrical box. I tinned my wire end to make the connections a little better but it isn't necessary. The physical size of the switch is comparable to the GE/JASCO which is much larger than dumb switch so the pigtail leads are really a big positive. Pairing with my hub failed on the first try so I just did a full factory reset per the provided instructions and it paired right up. Not an uncommon problem with Z-Wave products. I think people return them after pairing for whatever reason and the reset fixes all the sins of the past. Anyway, worth mentioning that my Hubitat did not select the proper driver but that is not the switch's fault. I changed the driver and everything worked well. The Hubitat built in driver only has 3 speeds but there are custom drivers out there if you want 4. I didn't bother in this case, 3 speeds are fine. From the physical switch, I can still select all 4 speeds with the side rocker. I very much like the LED indicators that show the speed selected. The switches are easy for guests to operate and do not need any explanation. If this switch holds up to power flickering then Leviton will become a top choice for me in the future. If it fails, I will edit this review and reduce the rating. For the price of these switches, I expect them to last at least 10 years. I don't think that is unreasonable. In summary, I like what I see so far. Time will have to prove the reliability.
jchawk
Reviewed in the United States on November 2, 2024
I have had nothing but trouble with my prior fan controllers (GE Jasco). They have all failed at this point.Thankfully Leviton has finally released a competing product.The installation went fine -- but getting it added to Smartthings wouldn't work out of the box. So I had to perform a factory reset on the fan controller (hold for 14 seconds until it flashes red, then release the paddle), then I was able to join the fan controller without issue.Hopefully this helps someone else.I'm hoping this fan controller last longer then the Jasco. If so I'll be buying 2 more. :)
Richard Forster
Reviewed in Canada on November 19, 2024
This is not a stand alone unit. You will be on the hook to buy another device to get this working. Just be sure you realize this before buying.
Recommended Products
$53.22
$ 21 .59 $21.59
$17.27
$ 8 .63 $8.63