Your cart is empty.
Your cart is empty.Product Description
TLBZK Hot Air Rework Station, 8018 110V Portable SMD Solder Station Heat Gun Digital Temperature Display with Nozzles Tweezers
This product is a portable hot air gun/desoldering station with temperature adjustable and high constant temperature control functions, featuring intelligent temperature control, small size, convenience, long service life, etc. It is a portable welding tool suitable for repairing, mounting and desoldering.
Product introduction
The hot air gun unit adopts a long-life ceramic skeleton heating element and the hot runner technology precisely Controlled by a microcomputer to make the temperature curve of the hot air gun meet the welding requirements of the SMT production process.
What is in the box ?
1 * TLBZK 8018 Portable Hot Air Gun
1 * Large Size Stand
8 * Hot Air Gun Nozzles
1 * IC Extractor
2 * Tweezers
Sleep Function
The ability to set the temp and hit the yellow button when I need the heat. Hit the yellow button again and it starts cooling down. When the temp is below 100 degrees Celsius, the system enters a sleep state.
Large Size Stand
Large size stand, simple to use, convenient to store, and more stable to place.
Tweezers
The tweezers that come with the packaging make welding work easier.
8 Pcs Hot air gun nozzles
Include 4/5/6/7/8/9/10/12mm,Various sizes to meet various job requirements.
M & M
Reviewed in Canada on March 5, 2025
Works just as described! Aside from the fact that the instructions were initially a little confusing, the tool works perfectly and the selection of nozzle sizes makes it very efficient and versatile. I wouldn’t hesitate to recommend this product!
Adrian
Reviewed in Canada on February 8, 2025
Plastic around it’s all melted , takes lot of time before do the job z not happy with it
Daryl J
Reviewed in Canada on February 24, 2025
I haven’t tried any other hot air rework tools, but my impression of this is that you get what you pay for. It works, but it’s cheaply made and the plastic housing gets quite warm to the touch. You get what you pay for. If you have a bigger budget, obviously a higher quality unit would be better. If you’re a basement hack like me and don’t wanna spend too much, this’ll do.
# 1saturn
Reviewed in the United States on September 4, 2024
The heat fluctuate on and off which is not good for hot air soldering.
Michael Stitley
Reviewed in the United States on August 27, 2024
I purchased this for a single project. I had to remove a transistor that is size of a flea. Couldn’t use an iron so after a recommendation, I purchased this heat station. Worked as expected for my delicate project. Very happy. Seems well made and a fraction of the price of other. Very easy to use. This investment saved me over $100 had I needed to have my project done professionally.
Jennifer
Reviewed in Canada on July 10, 2024
Heats up fast and extremely hot
Shopping Shogun
Reviewed in Canada on June 5, 2024
This heat gun works well for my heat shrinking needs. It heats up quickly and runs without any hitches so far. They included quite a few different sized nozzles which is nice when I want to concentrate the heat and a few tweezers, and a hand-held wire holder.The included stand for it is quite flimsy and is already starting to show wear after bending it closed and open a few times which is disappointing.It’s a nice kit so I hope it’ll last and not have any fan issues.
North08
Reviewed in Canada on December 30, 2024
I was a first time de-soldering guy and spent HOURS trying to use a solder iron, then a de-solder gun with no luck, apart from damaging my controller board. Then I tried this hot air tool and had my old thumb sticks off the new board within 5 minutes. This is the only way to desolder multiple points at once.
Yousif A. Hassan
Reviewed in the United States on November 25, 2024
Let's see, I have used this thing to:- replace my car's side marker reflectors- melt solder and remove chips from my Switch's motherboard- remove gooey stud/drywall adhesive from my basement bathroom studs during remodeling- open impossibly tight jar lids- heating up siezed bolts during car maintenanceEASILY hot enough to do anything a heat gun needs to do, and the smaller size gets into small places. I love the digital thermometer/heat read-out. You will need to be aware that it's not a gun format, so you need to hold it differently to gain stabiity if the task you are doing requires precision. I love this thing.
Sean Giacomucci
Reviewed in Canada on November 13, 2024
I checked it with a thermometer and it indeed heats at 500°C and get to the température really quickly. Great but a piece of plastic near the exit end melted a bit (but without touching the metal part hopefully)
Chief Engineer
Reviewed in the United States on January 21, 2024
Surprisingly, this thing isn't too bad. It seems well built, it's light weight, and quiet. I expected the fan to vibrate like an old dump truck, but it doesn't. Heats quickly and is easy to operate. You won't be blowing leaves off your driveway with it, but it's adequate. Used it to change the USB-C connectors on a couple of Nintendo Switch games, and it works great. I hope the heating element lasts a while, as I can't see parts being readily available, but for the price, you can't beat it.
NCChris
Reviewed in the United States on April 25, 2024
Fan does not work out of the box. Heats but no airflow. Unfortunately I waited too long to test it and cannot return.Would rate zero stars if I could.
Marc Olivier Chouinard
Reviewed in Canada on April 1, 2024
So far, I love this little thing ! I personally much prefer this version than the one with the base, as I rarely use it, and it will mostly be stored away.It worked really well with all the small components I tried. It not instant, but it fast enough for my needs.I tried a much larger chip, and I was about to burn my table under the PCB. So it not made for larger components I think (That said, I'm new to this, so there might be a way...).It open a whole world of posibility, and does make some repair work from tedious and ugly result, to something that is fairly easy with good looking result.You need need supply to work with this, but I was able to just pull a resistor and put it back with no issues with only what came with it. But if you want to do a better job, check video on line of professional and you will see what they used.
Recommended Products