Your cart is empty.
Your cart is empty. Description:
1. Comfortable portable handheld and the Digital LED display.
2. Microcomputer control , warming-up quickly.
3. Adjust the air flow and temperature control keypad.
4. Refer to the instructions included with three kinds of nozzles ( big , medium and small ) replacement part.
5. Would replace the part if the resistance value is incorrect.
6. When the temperature is less than 70°c , can stop rotation automatically.
7. High-quality resistance good for long service life.
8. Safe solder QFP , PLCC , BGA and other temperature-sensitive components.
9. Intelligent detection and cool airflow features.
10. Green lines and high-quality silicone body heat good for extend life and save power.
Portable Digital LED Bga Rework Station With Brushless Fan , 480W Technical Data.
Specification:
Operating Voltage: 110V
Power Frequency: 50-60Hz
Operating Power: 480W
Adjustable Temperature: 100-480
Adjustable Wind Pressure: 3-10mp
Mode: automatically
Display: digital tube/3
Dimension: 14.2cm × 6.5cm × 3.9cm
Weight: 776g /1.71LB
Package Include:
1 x 8858
1 x Power Cable
3 x Nozzles
Scott Atkinson
Reviewed in the United States on March 10, 2025
"I've been using Amazon for years, and it continues to impress me! The delivery is super fast, the variety of products is unbeatable, and the customer service is always reliable. I've had a few issues in the past, but their support team resolved them quickly and professionally. Shopping here is a breeze—highly recommend!"
cyul
Reviewed in Canada on May 12, 2024
Does the job in a compact package. The handle has a sensor and cools down when placed in the cradle. Nifty.
Catalin
Reviewed in the United Kingdom on February 16, 2024
Light use at 350c and it is gone
Doug
Reviewed in the United States on October 28, 2024
My review of said object which is a hot air rework station it works perfect and it does what they say it gets hot and I like it thank you very much have a great day it works perfect and it does what they say it gets hot and I like it thank you very much have a great day
Jeremy Wilkins
Reviewed in Canada on August 25, 2023
I must say I am quite impressed by this beast. It does what it was purchased to do and it does it well. So far it has held up though I mostly only used it for heat shrink tubing to get my ESD setup completed. Soon I will get plenty of SMD soldering with it under my belt and I'll update the review then. So far it works as intended, but I didn't expect it to stay running after it was shut off. Turning it on and off isn't straightforward I noticed. I recommend reading the power module instructions carefully. Once it is on, controlling the temperature is easy.
Miguel Ángel Pérez Hernández
Reviewed in Mexico on March 6, 2022
Se puede graduar el calor y las boquillas enbonan bien sin caerse lo recomiendo
Redion
Reviewed in Canada on February 25, 2022
Pros:- Compact- Has temperature calibration pot. Mine was 32C off and I was able to calibrate it even without opening the housing since pot is accessible through the vent holes with a tiny phillips screwdriver.Cons:- The wire is too small for strain relief and it freely rotates inside the hand held pieces which will cause connections to break after some use since not even a zip-tie preventing the wire from being pulled on from the solder joints. Recommending taking hand help apart and zip tying the edge of the cable to prevent pulling stress on the solder points. Keep in mind the heater is 120V and not DC like some other hot air stations and the main fuse is 6A so when wires decide to short out from being yanked and twisted you will have 720W explosion in your hand in a worst case scenario.- The main triac for heating element has its markings wiped, so when it inevitable breaks you won't know which part to order. Additionally the only cooling solution is a double sided pad but it's not enough. After using the fan for 10 min at 320C the triac was at 95.1C and the plastic housing was at 50.2C. Additionally the wiring that goes to the 8 pin connector is above the hottest element on the board and it is not rated for high temperature environment presenting a possible wire melting and shorting out in the future from prolonged use of if something is covering vent holes on the plastic housing. I am really nervous about the heat dissipation issue. The internal fan is using 12V DC so maybe mounting small tiny fan inside the controller could improve air circulation a little. But if you are using this only for short amounts of time then should be fine I guess; but anything over 10 min please keep an eye out on the controller temperature.- Biggest disadvantage is the fact that the tip is too short and clamp style hot air tips wont work with this stations. Factory kinda bent the tip to make the sliding groves so the tip puts on then twists to lock in place but if you switch nozzle adapters frequently then that will quickly wear out and eventually you will drop your tip onto your board while using hot air.- The label has some printing misalignment and english instructions is something from a comedy show.
Customer
Reviewed in Canada on March 1, 2021
Very easy to use. Works great. An airflow of 5 or 6 usually is enough for those use it was intended for and will lead a more accurate temperature reading. At airflow 8 and more, temperature reading is less reliable, it makes more use and I find it is, frankly, not necessary to use that much air flow.I have checked temperature with a digital probe. Temperature is quite accurate between 150 and 350 celcius. Under 150, it is "fairly" accurate. Especially if you keep airflow setting under 8. Above 350 celcius, especially at high air flow rate, it shows signs of difficulty to reach and maintain temperature. At 400 the element glows red, which means it will last less time. Temperature reading is less reliable at high air flow settings (7 or more).The heat gun works great and it appears to be a great costs/advantages deal. But only time will tell if the device lasts.Desoldering SMDs without damaging them has turned more difficult than expected and I will need tutorials and practice. But it is NOT the heat gun. The heat guns itselfs works great.
Tonatiuh Oviedo salcedo
Reviewed in Mexico on October 28, 2021
Funcional en cuanto a calidad precio su temperatura no va con lo que marca pero es funcional, bueno para componentes SMD
SXT-001
Reviewed in Canada on July 30, 2020
This desoldering machine is very good for the electronic rework station. It is small enough to fit on any work station and portable as well. I have been looking for this kind for a long time. it gets to adjusted temperature very fast and it automatically shuts off when it is put back on its stand.I used it to remove small IC's without damaging the part nor the board, and would say it is comparable to a professional machine. All in all it does its job very well.It is also very easy to use and it is exactly as it is described. It is very strong built, light and the handle very easy to grip and convenient. I hope it lasts me for long time to come since i don't use it every day. I recommend it for any one looking for small PCB desoldering workstation.
KenLongCanada
Reviewed in Canada on December 16, 2020
This is a good quality heat gun suitable for hobby use. Everything is well made with the exception being the digital temperature controller that uses a amateurish, complicated computer program that makes making adjustments somewhat annoying. Nice that the kit came with tips for controlling the air flow but a more user friendly professional temperature controller would make a significant improvement.
Aram Azhari
Reviewed in Canada on October 9, 2020
I put this on various temperatures and no matter what i did it took forever to do anything to the solder paste, took so long (2 minutes) and wasn't completely melting things. My Sn42's solder paste curve was peaked at 165 celsius but no matter what I did it didn't work. Also, it turns on if you lift it from the stand and turns off if you put it on the stand. For setting the temperature and the air flow, there is a really loud beep that will surely wake people up if they are nearby. I will save money and hopefully go for a one that has a station.
Recommended Products
