Your cart is empty.
Your cart is empty.Product Description
5X Pro Mini ATmega328P 3.3V 8M Development Board with Pin Headers
Jim in Arizona
Reviewed in the United States on May 30, 2021
Like - this suppliers 3.3V mini works with an arduino Uno as the FTD serial interface to a PC. Other suppliers don't. I suspect its how robust the interface is to the 5V logic coming from the Uno.Dislike - Nothing that I've encountered. Works like a champ.
SK
Reviewed in the United States on June 15, 2020
Boot0=1 will not put it in serial boot mode to load the USB bootloader for Arduino. Likely this knockoff processor doesn't have an embedded serial bootloader like an original STM32F103C8T6 ARM.
Ryan Darst
Reviewed in the United States on November 14, 2019
Decent enough for the price. In order to upload I had to put a 100 nF cap between the DTR line of my programmer and the reset pin of the mini.
Irv
Reviewed in the United States on July 28, 2017
Works well, once you do some on-line searching for example code. With this attached to a Nano clone, you can put a web page on your network with various sensor values displayed. With a bit of css and html experience, you can make the display attractive (since most of the work will be done by the web browser, not the server).
Christopher L. Scutt
Reviewed in the United States on October 2, 2017
NANO with wired ether, no problems
Recommended Products
CA $231.53
CA $ 99 .00 CA $99.00
CA $51.76
CA $ 25 .99 CA $25.99
CA $33.48
CA $ 15 .99 CA $15.99