Your cart is empty.
Your cart is empty.Package included: 2 x ESP32 S2 Mini WIFI Board
lecintre
Reviewed in France on August 17, 2024
Pour l'exploit de la PS4 fonctionne très bien. Pour la domotique je ne l'ai pas encore testé.
Ronald Johnson
Reviewed in the United States on June 14, 2024
Followed some youtube videos on how to set it up, and it has been perfect. I like this much better than having to remove the usb like before, this does that all for you.
Customer
Reviewed in the United States on February 15, 2024
Installed Micropython and it reports 2MB of PSRAM. Had to use the ESP flash_download_tool. First download MicroPython ESP_Generic_S2. As others have said, plug it into your PC, hold the boot(0) button down, press reset button, and then release boot(0) button. Check in device manager to make sure it shows up under ports. Then in the flash_download_tool, select chip type esp32-s2, develop, and uart. Erase. Select ESP32_Generic_S2 of MicroPython. I wrote it to 0x1000 using defaults. But I think I also tested 0x0000. After writing is complete, press the reset button. If everything went well, you should see a new (different) COM Port listed in Device Manager.The boards seem to work just fine for MicroPython, and the extra memory and speed compared to ESP8266 boards is very handy.The double rows of pins take some getting used to, but I would rather have the pins for the size. But plan ahead on your board layouts and connections it can get messy fast.Right now it appears to be the cheapest, fastest way to get a usable (memory) version of MicroPython on a small board.
BernieG
Reviewed in the United States on December 7, 2024
I purchased this item to start learning how to program the ESP32 in the Arduino IDE environment. After many hours of trying and researching, I could not get a Sketch (Arduino program) to upload to the DiGiYes ESP32 without causing the following error:WARNING: ESP32-S2FNR2 (revision v1.0) chip was placed into download mode using GPIO0.esptool.py can not exit the download mode over USB. To run the app, reset the chip manually.To suppress this note, set --after option to 'no_reset'.Failed uploading: uploading error: exit status 1As the boards did not come with any documentation, I will have to order a different board before I can return to learning how to program this chip.
Ronron
Reviewed in France on April 2, 2024
Compatible avec des environnements de programmation populaires comme Arduino et MicroPython, le S2 Mini s'avère accessible et permet une prise en main rapide.Ses 27 broches d'E/S, comparées aux 16 du D1 Mini basé sur l'ESP8266, offrent une grande flexibilité pour divers projets, permettant de connecter plus de capteurs, d'actionneurs et autres composants.Son format compact, semblable au D1 Mini, permet d'utiliser les shields D1 Mini existants avec quelques ajustements.Les pins à double rangée peuvent être moins adaptés à l'utilisation sur une platine d'essai que les simples rangées.Pour les débutants et les amateurs qui recherchent une carte de développement ESP32 polyvalente et abordable, avec une facilité d'utilisation et des fonctionnalités étendues, l'idéal durant une phase d'apprentissage.
Recommended Products
CA $47.19
CA $ 23 .99 CA $23.99
CA $354.08
CA $ 99 .00 CA $99.00