Your cart is empty.
Your cart is empty. Spec:
Item Type: Guitar Intonation Adjuster
Material: Zinc Alloy
How to Use:
Loosen the strings (remember to loosen the lock nut first), then slide the lugs of the intonation setting tool between the back of the bridge and the fine tuning tool. Tighten the screw until it begins to clamp. This ensures that the bridge saddle will not slide forward when you loosen the hex bolt. You can then adjust the intonation by tightening the tool knurled ring to move the string back if it is incisive, or loosening the tool to move the string forward if it is flat. Readjust the string and check, repeating the process if necessary. Then do the same for the other strings, retighten the lock nut and fine tune as necessary.
Package List:
1 xGuitar Intonation Adjuster
Notice:
Do not attempt to adjust the string to tension, you will need to loosen, adjust, and retune. Work on only 1 string at a time and loosen only 1 bridge at a time.
P.C.
Reviewed in Canada on January 1, 2025
Only worked with my FR1000 series. The bolt that locks the string into the block does not come out far enough for this to work on any licensed FR. Suggest getting the expensive Red Bishop acculocator if you really want to intimate anything that isn't an OFR/FR1000
Recommended Products
CA $20.24
CA $ 8 .99 CA $8.99
CA $35.83
CA $ 17 .99 CA $17.99
CA $28.26
CA $ 13 .99 CA $13.99
CA $10.69
CA $ 4 .99 CA $4.99