Your cart is empty.
Your cart is empty.Product Description
TLBZK 8858+ Hot Air Soldering Station SMD Welder Rework Digital Display Heat Gun
Hot Air Gun Handle
Designed ergonomically to provide better grip for welding personnel,
The handle is made of heat-resistant materials to increase work safety.
Nozzle Installation Easy
The installation of the air nozzle is very simple, just press it in and rotate it once to install it firmly.
Automatic Sleep Mode
When the handle is placed in the bracket, it will automatically cool down and standby,
This energy-saving design increases safety.
Packaging List
Complete repair kit
Body x1
Handle x1
Nozzle x 8
Power cable x 1
IC puller x1
Tweezers x2
Instruction manual x1
Product Features
- Model number: TLBZK 8858+
- Type: LED display screen
- Power consumption: 680W
- Temperature range: 100 ° C-500 ° C (212-932 ° F)
- Heating parts: Ceramic
marcus vela
Reviewed in Canada on March 7, 2025
my only issue is on the very end. The plastic melted a bit. I was able to remove this but don't put it to maximum heat if you use 350 to 400 the plastic didn't have any issues. I would also recommend short sessions.
Customer
Reviewed in the United States on March 28, 2025
For: TLBZK Hot Air Soldering Station SMD Welder Rework Digital Display Heat GunUsed it to gently open earbuds so I could replace the batteries. Worked well
NorthernGuy
Reviewed in Canada on March 21, 2025
Works good.
Ric
Reviewed in Canada on March 2, 2025
And not clear descriptions of use and set up shut down make this iffy for use as noted by others. These are useful for rework but issues out of the gate are non starter for me any way
Brandib65
Reviewed in the United States on March 2, 2025
I'm really impressed with this TLBZK hot air soldering station! It heats up quickly, has precise temperature control, and is easy to use for electronics repair. The airflow is adjustable, making it great for delicate soldering work. The build quality feels solid, and it comes with useful accessories.Cons- it’s not as easy as turning a dial to change air speed and I wish it was a little lighter.Overall, it’s a fantastic tool for the price.
grinch
Reviewed in the United States on February 24, 2025
Check the temperature because the number on the tool is only right when the air exit opening is very close to the solder. I measured the air temp with a good thermometer and a setting of 260 C was actually only 147 C about an inch away. Otherwise, I really like it and it does the job.
Josh
Reviewed in the United States on September 8, 2024
This works so well for pcb rework. I've never had anything other than a standard heat gun and this changed the game. Very easy to use, and worth the money
osiris
Reviewed in the United States on August 19, 2024
This $30 Hot Air Station comes with 8 tips of different sizes (they are all circular, it would have been nice to have square or line ones as well) It also comes with two tweezers. The unit allow switching between C or F by holding the up and down and turning on the power button. The unit also allow 10 different fan power settings. When first turned on, there was smoke and a red glow inside the wand. It's gone after a few minutes. The power unit is extremely light and of average quality plastic. I don't think any components are heat resistance, so be careful where you aimed it. When you docked, the unit will displayed --- and not a temperature and continue to blow air until it's cooled enough then the fan turned off. I would preferred to see the temperature drop as the wand cooled down. When the desired temperature is reached, the unit will give a single beep.
F150 Guy
Reviewed in Canada on November 22, 2024
Ergonomic handle design ensures a secure grip and lightweight comfort for extended use.Heat-resistant materials enhance safety, making it ideal for high-temperature applications.Adjustable temperature range from 100℃ to 500℃ (212℉ to 932℉) with an easy-to-use LED digital display.Airflow adjustment settings (F1-F10) allow precise control for various SMD rework needs.Heats quickly with 680W power and maintains stable temperatures for consistent performance.Sleep mode prolongs the heating element life by automatically turning off when the handle is docked.Includes 8 air nozzles, two anti-static tweezers, and an IC puller for versatile rework tasks.Ideal for mobile phone repair, computer repair, and electronic soldering, catering to both beginners and professionals. I use it mostly for soldering work, and it has performed well at this.Sensor-equipped handle starts heating when picked up and stops when returned to the rack for ease of use.Its compact, portable design makes it suitable for bench work or on-the-go repairs.Good tool and a solid value.
Ben
Reviewed in Canada on November 19, 2024
Got it yesterday and rapidly desoldered three 8-WFDFN IC's within seconds. I should have bought this tool a long time ago. For the price, this is amazing. I used the F10 max speed with the smallest nozzle and max temperature. At first I tried with the default F06 fan speed and it did not appear to do anything. Then I switched to F10 and it worked within seconds. I think the only thing that would be nice to have are curved nozzles because I do SMD through microscope and the size of this tool makes it difficult to reach since the microscope is close to the PCB therefore not much room to heat-up the parts and has to be done in an angle rather than vertically. But still, I love this and will purchase 5 for the office.
Prem
Reviewed in Canada on October 7, 2024
The media could not be loaded.
Recommended Products