Your cart is empty.
Your cart is empty. Hygger Pinpoint IC Temp Controller Aquarium Heater will be your best choice!
Specification:
Voltage: 110V-120V, 60HZ
Power cord length: 5.5 ft
Available In:
Length - 8.7", 5~10 Gallons, 50 Watts
Length - 9.8", 10~25 Gallons, 100 Watts
Length - 10.7", 20~45 Gallons, 200 Watts
Length - 12.3", 60~120 Gallons, 500 Watts
Notice: Please read instruction and cautions of package box carefully before use, and keep it away from children.
☻ This titanium heater is not suitable for use in acrylic fish tank.
☻ DO NOT use heater alone, to avoid overheating, it must be worked with thermostat and temperature detector. Keep heater and thermal detector submerged
☻ Make sure the heater is completely submerged in the water before power on.
☻ Make sure the thermal detector is fully submerged when it's on duty.
☻ We recommend to install a water pump or wave pump to circulate water movement so that the whole aquarium area at the same temperature.
☻ Make sure heater placed horizontally and fully submerged when it's on duty .
☻ DO NOT put the aquarium heater into the sand as it will burn the case and casue electric leakage.
☻ As thermostat is not waterproof, please keep it away from aquarium. Stay dry.
☻ If you want to clean the fish tank or take out the heater, please DISCONNECT power and wait for 30 minutes to cool down.
☻ This heater is only suitable for indoor use.
☻ We don't suggest to use this temperature controller for other brand heater for security reasons.
Package included:
1* Submersible Aquarium Heater
1* Thermostat with Detector
2* Suction Cups
1* User Manual
***Internaitonal customer beware of the local voltage. Any voltage over 120V will burn out the controller and heater without transformer.
Eduardo Gutiérrez
Reviewed in Mexico on November 22, 2024
Lo compré para asegurar una temperatura más estable y monitoreada. Es práctico y de excelente calidad
Wizardshoard
Reviewed in the United States on November 19, 2024
Had to contact customer service before receiving unit. They were responsive, compassionate, and polite. Once the unit arrived, installation was easy, and the unit worked perfectly.
Randyman
Reviewed in the United States on August 7, 2023
I just replaced another expensive digital heater in our tank that barely made it six months. This one was a much easier install as it is more versatile and I was able to insert the heating element unseen in the trickle filter below while adding the probe up top in the main tank. I mounted the control unit behind the tank and I can see the readout through the tank. So far so good and I will update this post as time goes on if this survives and performs as well as it is right now. I have had countless tanks, built many and also the filters. as I founded Aquarium Research many years ago and we designed the very first trickle filters out there. So, been around for awhile, I have lost count of how many crummy and so so heaters I have witnessed. This one looks quite promising.
Stuart M
Reviewed in Canada on September 26, 2022
I like that the temperature is way more accurate then my previous heater. I like that the heater can be placed horizontally). I like that both water temperature and heater set temperature are displayed independently.The suction cups for the titanium element would be better if they were the clip-on type (hard plastic with removable suction cups). The unit comes with an all plasticized rubber loop ring style.
Sam
Reviewed in Canada on July 29, 2021
Product clearly shows it should come with 2 suction cups but I only received one so this drives my OCD through the roof, so photos and description is NOT accurate
lee
Reviewed in Canada on March 16, 2021
Very pleased with this heater. So far, the temperature seems to be accurate enough. I don’t seem to have a thermometer that measures the EXACT same temperature. So as long as it’s within 1-2 degrees I’m happy. I love how easy it is to operate and read.It was missing a suction cup when I received it. But customer service were very responsive and sent me a set of cups in less than 3 days.My only complaint would be that the suction cup used for the thermometer doesn’t seem to stick inside the tank... only the outside. I had to get a little creative but hoping this will be fixed in the future.Definitely will buy this heater again for future tanks or replacements.Will update my review if anything changes!
Adam Gordey
Reviewed in Canada on March 1, 2021
Awesome heater for light duty use. (Max temp like 100°f) perfect for hydro reservoir on cold floorIf ur application may involve this at anytime not being under water won't break like the glass ones. Temp probe cord about 4' off the module itself power cord little longer. Suction cup on probe and heater work very well on simi smooth serface of a plastic tote. Small key hole style hole on back of unit to hang on wall
Jeff Knoll
Reviewed in Canada on December 26, 2021
Stopped heating after 3 months. Did everything correctly, fully submerged.. I have had multiple heaters in the past and this is the first one to stop working in under a year.
Customer
Reviewed in Canada on October 5, 2021
Use heater for maintaining temperature in my sugar wash....does a excellent job
Bev
Reviewed in Canada on January 24, 2021
I bought this because I previously bought the same one one and liked it so much that I wanted this for my 10 gal tank. It is very accurate at keeping the water one degree of setting. I set for 79, it comes on @ 78 and back off at 79. I'd wished it could set between the degrees but is more accurate than any other heater I've had. Easy to set up. Could have better suction cup design. Only give you one and very difficult to get on . Over all I'm very happy and time will tell on durability.UPDATE: Just over a year old and died? How do I contact this company???
Donna
Reviewed in Canada on January 20, 2021
Best aquarium heater I've ever used. I love that the setting control is on the wall and I can see the temperature easily.
Tom Burke
Reviewed in the United States on October 20, 2020
"We don't suggest to use this temperature controller for other brand heater for security reasons."I have no idea what "security reasons" is supposed to mean, but for SAFETY reasons you SHOULD use a different heater, one with its own built-in thermostat, with this controller. If the temperature probe gets pulled out of the water (it happened to me, and I didn't notice until too late), or if this controller fails (other reviewers have had this problem, though not me), the heater will stay on and kill your fish.The controller uses a simple mechanical relay to turn the heater on & off, so you can use ANY heater (or combination of heaters) that does not exceed the power rating of the controller (500 Watts for the HG-902 controller, 200 watts for the HG-802 controller). Use a heater with a built-in thermostat, and set it slightly higher than you want to set this controller (but, not high enough to harm your fish). Then, if this controller fails and keeps the heater on, your fish will be protected.Also, the product description warns not to use this heater in an acrylic tank (presumably because the "titanium" heating element is unshielded and gets very hot). But you can use a shielded heater with this or, for more even heat distribution, TWO lower-power heaters (totaling no more than the controller's maximum rating) connected with an AC splitter. This is how I use mine, and it works great.So, you may ask, if you're going to use a heater with a built-in thermostat anyway, then why use this controller? Well, this controller is FAR easier to set accurately than those little twist controls on most aquarium heaters, it gives a large, easy-to-read display of your tank temperature, and it provides the backup protection described above.So, I really like this product, and only wish that the controller could be purchased without a heater since it is unsafe to use it with the "Titanium Tube" heater it is supplied with.By the way, if you're handy with electrical stuff, you could use even the HG-802 controller supplied with the inexpensive 50-, 100-, and 200 Watt models to switch a high-power external relay. Then, you could use ANY heater(s) you wanted, up to the maximum rating of your external relay. Kilowatts and kilowatts! I'm planning to do this with an 1600-gallon indoor pond that I'm currently constructing.Heck, you could even use two of these controllers connected in series (both probes in the water, first controller set for a slightly higher temperature) for extra safety. One controller might fail, but it's extremely unlikely that both would fail at the same time. Your fish will thank you by staying alive.
arlee51
Reviewed in the United States on April 2, 2019
I really like the external power source and temperature setting and the unbreakable heater tube which heats slowly and dissipates slowly. And the user guide does say that the heater itself must be placed horizontally in the aquarium. A few days in, one of the suction cups came loose and it tilted to a 45 degree angle whereupon it started shorting out and messing with the power in the entire fish room. That was scary but it straightened up after I got it horizontal again. I've since placed a small flower pot underneath it to prevent that from happening again. But my biggest negative about it is the one degree spread before it calls for heat. In contrast the Eheim Jager heaters in my other two tanks only have about a 2/10 degree spread. All in all a good unit but not quite five star worthy.Update 5/16/2020: After a year in service, I've upped the rating to 5 stars. Had one eihiem burn out and one's stuck at 89 degrees and won't back off. This one however is working fine and that one degree spread is very livable.
Recommended Products
$35.99
$ 18 .71 $18.71