Your cart is empty.
Your cart is empty.The rotary tool is a versatile tool that allows you to grind, cut, sand and drill. Remove rust on metal and get into fine detail on wood and metal with precision control. It has a powerful 1 amp motor and variable speed from 8,000 - 30,000 rpm. This kit includes: variable speed rotary tool, bit changing wrench, 2 felt polishing wheels, 2 high speed cutters, 10 grinding stones, 54 sanding discs, 1 dressing stone, 20 cut-off wheels, 4 sander bands, 1 drum sander, 2 mandrels, 2 drill bits, 2 collets.
7723doug
Reviewed in Canada on December 6, 2024
I bought it to replace a 10 year old tool which broke at the chuck.This is exactly the same tool in design so if it lasts 10yeard will be more than happy.I have used on a number of jobs and pleased with performance.it come in a handy storage case
Ian B
Reviewed in Australia on August 19, 2023
Can't complain, with this you get better than what you pay for. I bought this to see if it could cut off a brass fitting inside a wall. I still have plenty of cutting wheel left. Using cable was great to get at a few old nails to remove. Couldn't use hammer as wall too delicate. Recommended product.
Timmer
Reviewed in Canada on June 8, 2023
Purchased this when my flexible shaft Dremel unexpectedly died. The Wen offers incredible value for the price. Works well, and time will tell how durable it is. My complaint is with the quality of the flexible shaft. there is no lock button on the shaft when tightening the collar — you have to insert the pointy end of the wrench or a small screwdriver — no big deal, but makes it a bit more awkward. The main issues are that the end of the shaft gets hot and there is a lot of vibration. If you are doing precision work, I would suggest that you look for a better quality unit.
JMJT
Reviewed in the United Kingdom on January 17, 2023
It was great value.
Murugesan ஸ்
Reviewed in India on May 8, 2021
Not worthy of money
Charlie Worton
Reviewed in Canada on March 9, 2020
This is a good example of a generic rotary tool, and represents good value. But there's one important difference, and that is the thread size on the drive shaft. Original Dremel tools use a 0.28" shaft diameter, with a thread count of 40 TPI. This tool uses a metric value of approximately 8mm; and this means that any Dremel accessory intended to fasten directly to the rotating shaft - a miniature drill chuck, for example - will not fit. Adding to the frustration is that this specification isn't mentioned anywhere, with the result that you can easily wind up purchasing accessories that will fit a Dremel, but won't fit this. And indeed, that is what happened to me. So, a word to the wise: try to determine if the thread size of the shaft is compatible with original Dremel accessories. I can tell you that this tool is not.EDIT: Since writing this review, i have found two chucks on Amazon that will fit this rotary tool. Here are the links:https://www.amazon.ca/gp/product/B019NYNLLI/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1and the genuine Wen rotary tool chuck, here:https://www.amazon.ca/2305-KC-Keyless-Rotary-Tool-Chuck/dp/B072LXHBHP/ref=sr_1_3?keywords=wen+rotary+tool+chuck&qid=1583980808&s=hi&sr=1-3I purchased the less expensive one, and can verify that it works well. Given that this tool is supplied with a flexible shaft extension, the availability of this chuck probably means that there's no reason to avoid purchasing this tool as a result of incompatibility. The vast majority of accessories will fit in the jaws of this chuck, so with the addition of this chuck you basically sidestep the incompatibility issue.
Cocar
Reviewed in Mexico on January 16, 2020
100% recomendable, es totalmente comparable con DREMEL, además de compartible con los accesorios originales, lo probé con mi accesorio de router y encaja a la perfección.Presentación: La caja donde viene es de plástico grueso, aunque la tapa es transparente no es delgada, por lo que se ve resistente, lo único es que, a diferencia de una caja de DREMEL, no tiene habitáculos independientes para encajar cada aditamento como brocas, discos, etc. Solo la cajita con accesorios de mediana calidad, pero está bien, aceptable!Funcionamiento: El motor con la misma eficiencia del original, tal vez menos revoluciones, pero suficientes para cualquier trabajo. Lo usé por tiempo prolongado puliendo piezas de cobre para abrillantar y el calentamiento no fue molesto,’es decir, normal. El mandril no trae varias medidas como el original, habrá que comprar por separado, pero la medida que trae es la básica para la mayoría de accesorios que se usan. Viene a 110v, por lo que es compatible con el sistema Mexicano.Entrega: Tuve problemas con la entrega ya que la paquetería perdió mi herramienta, pero Amazon se hizo responsable (como siempre lo ha hecho conmigo) y me devolvió el dinero e hice la compra nuevamente. De ahí en adelante comencé a recibir notificaciones de en dónde se encontraba mi producto hasta llegar a mis manos. Fue un poco larga la espera, pero valió la pena.Mi reconocimiento a Amazon por su excelente servicio y atención al cliente, mucho mejor y más personalizada que en un centro comercial o de autoservicio, mis respetos. Todo lo que he comprado en Amazon me ha llegado bien, sin quejas (la paquetería es otro asunto)Conclusión: excelente producto, buena calidad, precio inmejorable, 100% RECOMENDABLE.
Roger Hayes
Reviewed in Canada on January 6, 2018
This works really well. Even though it is not expensive, I am impressed with the quality. The variable speed makes it nice to dial in just the right RPMs for the job. I love the flex shaft and its smaller handle, which makes it a lot easier to control the tool head for fine details. It comes with a large selection of bits, and I purchased some extra diamond bits for it that were not expensive at all. It reminds me of my expensive jewelery tool I used as a jeweler, but the cost is way less. I look forward to many hours of fine detail work with it.
Devlin
Reviewed in the United States on April 13, 2017
If you are looking for a replacement fora tool that goes by a well-known name, I believe you have it here. I made the mistake of buying something similar from a cheap tool store and it would bog down when trying to do almost anything...no power at all. This rectified the situation and goes so fast I have to make sure that I am extra cautious. I got a little spoiled (?) by the weak version of a different brand because that wasn't throwing shavings or items anywhere...This DEFINITELY will!!I got the version without the flex shaft (I wanted this to trim 223 brass..in which case you should get some metal cutting wheels). This is perfect and is way strong enough to do whatever I need. Just be careful, wear safety glasses and stay safe. This did come with a dearth of attachments but for the motor that is in this thing, it is a beyond good trade-off since most will probably go get their own anyway.For less than 17 bucks with Prime, I cannot complain though. It is sooo much cheaper than the brand name version that I can afford to buy the specific ones I want without worrying about breaking the bank. This is pretty awesome for the price and if it does not break or wear out prematurely, it will remain a hearty 5 stars!One question though...kind of funny but it goes to level 6 for the fastest setting. Funny...like how some tools go to 11. haha I'll still take it!
peter
Reviewed in Canada on May 5, 2016
Good tool for price. Feels well made. Nice rotary dial for speed control. Use mine for models and has nice slower speed for a rotary tool. Just fast enough not to bog down but not to fast to melt anything. Note no lube oil in flex shaft. Used it on high and within moments to hot to hold shaft. Spring got to hot to hold. Also front of tool gets warm after a short periods ( five to ten minutes ) if you're going to use this tool lightly it will do the job for you. If you're into heavy duty cutting and grinding by a better tool. Update. Lubed flex shaft with film lube ( the consistency of light under coating ) hung shaft vertically and let lube run down. Ran shaft at low speed and high no over heating. Tool still gets warm to touch but it has an internal fan to cope with the heat.
Blackrain
Reviewed in Canada on June 8, 2015
For a couple of years now, I have wanted a Dremel tool bit simply could not bring myself to spend the money. Many jobs came and went, where I wished I had one. Quite by chance, I happened upon this rotary tool WITH A FLEX SHAFT and a number of assorted bits for a price that made it hard to say "no".As soon as it arrived, I started using it. While I will say that a couple of the sanding drums slipped a bit on the end of the shaft under pressure, all in all, I am super impressed.The assortment of bits, the variable speed of the tool and the added value of the flex shaft, made this a fantastic buy. Suddenly I was seeing a ton of jobs that I could benefit using this tool for and now I wonder how I went this long without one of these. Although I can not speak to it's longevity, I will say that this is an even greater value than I was hoping it would be. This is one of the better "surprises" from my many purchases on Amazon. I will buying a few more of these to take care of a couple of birthdays and possibly a Christmas gift or two. I believe in it that much.Will update review if anything is worthy of reporting over time...
Recommended Products
CA $89.00
CA $ 43 .99 CA $43.99
CA $25.16
CA $ 12 .99 CA $12.99