Your cart is empty.
Your cart is empty.ExagonX
Reviewed in Italy on March 2, 2024
Grazie a questo prodotto ho recuperato tanti compone ti che normalmente danneggiavo con la dissaldatura
juan carlos
Reviewed in Mexico on March 22, 2023
He recibido mi paquete pero no hace la función de succionar , o extraer la soldadura , al activar el gatillo suena fuerte pero no tiene nada de fuerza para extraer la soldadura ....
Cliente
Reviewed in Italy on April 25, 2023
Ottimo prodotto e buono il rapporto qualità prezzo
David Spence
Reviewed in Canada on July 25, 2022
Great product quality and stable temperature control.
Peanut
Reviewed in the United States on March 15, 2022
I know varying reviews on this but from my experience, it works well. It is loud as the fan spins fast. There are youtube videos to fix this. I feel it is acceptable. Suction wise, it works well for my purpose, PCB board repair. I use the larger tip which fits well over the top better. I have not had the clogging issue mentioned, but I use the provided cleaner brushes often and while using. No real usable instructions come with this and that is disappointing. But it is pretty straightforward.To clean, there is a small button on the back of the wand that you push down and the top black piece pulls back. this releases the clear cylinder tube, but not all the way. You have to force it out some with the back of the tube coming out first. Then to reinsert, start with the front of the tube first.All in all, this really makes a difference for if you need to remove many parts.
Samson Wick
Reviewed in the United States on May 30, 2018
I've been using this for a couple months now and it's great. It's my first vacuum powered desoldering device so I can't directly compare it to anything, but it does the job and does it well. It heats up quickly, has strong vacuum and pulls away the solder easily.Update: May 2019I've been using this de-soldering station for just about a year now and I'm still very happy with it. I've probably collectively removed about half a pound of solder with it. I haven't exactly been treating it with kit gloves either. (Honestly I've been much harder on it than I should). There were a couple of spots where I let it go too long before cleaning the catch tube and allowed the filter pad to clog, and a couple of mishaps where the shaft was clogged at the catch tube with skunky half-century old solder because I didn't swab it out with the provided cleaning rods in time - this is really my fault. The shaft can't (and shouldn't) get hot enough to melt solder at the catch tube end, but its entirely fixable. If this happens to you just shut the gun off, remove the catch tube, push one of the cleaning rods into the shaft and press while you heat the catch tube end with another soldering iron - after a few seconds the stuck solder should loosen and push out the old solder.Replacement tips and filter pads have been easy to get.After a year the gun still heats up quickly, the vacuum is still strong (despite the fact that I allowed it to get clogged numerous times). It DOES get clogged sometimes but not if you make a point to clean the catch tube after heavy use and use the cleaning rods each time before you put the gun back in its holder.
Recommended Products
$28.62
$ 12 .82 $12.82