Your cart is empty.
Your cart is empty.Product Description
newacalox rework station 858D
NEWACALOX Hot-air rework stations can be very handy.A rework station equipped with advanced functions, essential accessories and tools. This station comes with PID Temperature Stabilization, Standby Mode, Digital Temperature Calibration, and more. You can use this station for applications including but not limited to SMD soldering, SMD hot air rework.. Helping you accomplish your work is worth more than anything to us. In the package, we included in a pack of essential tools to help you complete your task.
Package includes:
1 x 858D Hot air Soldering Station
1 x Hot air gun handle 1 x Handle stand
2 x Tweezers(fine tip curved, fine tip straight )
1 x Desoldering Pump 1 x Power cord * 1 US
3 x Nozzles( 5mm,8mm,10mm ) 1 x IC Extractor
1 x mini Pliers 1 x Mini Screwdriver 1 x instruction
1 x heat gun stand 1 x nozzles holder
heat gun stand install way
Adjustable Hot Air Gun Holder
The additional heat gun stand can help you adjust and fix the position of the hot gun at any time during welding work.
It can be adjusted up and down to reach the position where you are satisfied with the hot air gun that needs to work, and completely free your hands.
Can place used air gun nozzles, to keep the workbench tidy and avoid scalding.
Need-to-Know
Efficient engine
Multi-component precision design, offer precise temperature control,.
Fast heat dissipation, compared to ordinary soldering stations can reduce 10% energy consumption.
Tips: transformer away from the output wire, the output wire with protective cover is safer.
heat gun stand
this stand have drilling holding holes ,you can install it according to your own hands usage habits
8-hole connector
When the solder is liquid , place the tip of the solder sucker next to the liquid and press press the trigger
replaced plug
It adopts aviation metal and outer layer injection molding, one-time forming, have good toughness and anti-oxidation.
Safer Hot Air Gun
Stand-by Mode
Temperature Memory Function
Anti-Static
R&D Janzen
Reviewed in Canada on November 30, 2024
Looks and works great. Heats very quickly and cools itself when back in the cradle
Frank Thompson
Reviewed in Canada on October 26, 2024
I've used this on almost a daily basis for 4 months now to rework/remove/replace components. Have no complaints with it so far. First hotair reflow station i've owned and I am impressed with it for the price.
Patricia Lisotti
Reviewed in Canada on October 11, 2024
Worked pretty good just had to fix the heat gun connection came loose in the heat gun right out of the box
Jantje
Reviewed in Canada on January 14, 2024
Very decent quality and both the airflow and temperature adjustments work well. I soldered various SMD and SOIC components successfully with this heat gun. It’s important to use proper solder and flux.
Elie
Reviewed in Canada on March 30, 2023
Good proud for light work
Torvex
Reviewed in Canada on March 29, 2023
Have not used it much yet but the little I have tried it, it seems to work well. No complaints.
Tom B
Reviewed in Canada on March 13, 2023
Not sure about its long term durability, but I'm very pleased with its function out of the box. Has a self cooling sleep mode when not holding the blower, and flow adjustment is good. Melts solder like a boss and the temperature control is pretty good to keep from burning flux and components. I like all the little extra tweezers, solder sucker, and tips, though I'm not sure what the 2 prong wire fork is supposed to be for.Not giving five stars because the electronics are quite cheap in the end.
Qzack
Reviewed in the United States on January 6, 2023
This is truly a very awesome tool. Has the ability to remove chips from electronic boards so they can be replaced. With it I have replaced the Ram on the Original Xbox, removed a xbox video port, replaced a CDI timekeeper chip, Sega CD Ram Module & reflowed a PS3 motherboard. All that is needed it to add flux and set the temperature control to what you need for the job. The air gets hot enough to melt solder, then with the enclosed tweezers you can remove your component. I highly recommend this for anyone who does electronic repair and deals with component level board repair.
Sewolf
Reviewed in Canada on April 22, 2022
After reading many of the past reviews I came to the conclusion that this was the best tool for me at this time. I did discard the power cable that came with it since many had issues with it and I am using a heavier Guage power cable that I already had from a past laser printer I used to have. It does work great, just testing it I found it does get to temp very fast and when put into sleep mode, it also cools off just as fast. Will be testing it out tomorrow further. If anything arrives I will repost here.Updated ******Been using this wonderful tool. Love it and I use this rework tool for almost everything I need to do. Handle does get a little warm but not enough to prevent working with. I highly recommend this tool
Ray Phillips
Reviewed in the United States on March 25, 2021
I've only used it once so far but it helped me fix my girlfriend's hard drive, lol. I needed to swap a surface mounted ROM chip. It got up to temperature quickly. I didn't have any problems other reviewers have had with the tips. In less than five minutes I had the old chip off the original board, the chip off the replacement board, and the original chip back on the new board. Easy peasy. The included tweezers came in handy. I probably won't use it very often, but if I have any reliability issues, I'll update this review.
Waleed
Reviewed in the United Arab Emirates on March 30, 2020
Its very low Quality I just got it Whe i inbox it And trying to Use It Wont Working At All Weast of tiem & money
mimas
Reviewed in the United States on January 31, 2020
I liked it for the short time it worked. Wires are of convenient length (3ft), not too stiff. Easy to set up and control, heat up speed is reasonable, as is the price.The problem is the air gun broke when turned on for the first time. When I turned the blower on it started to heat up and within some 3-5 seconds, something inside of the station clicked. The air gun kept heating up until the heat sensor error came on (while heat and blower still on). Upon reading instructions/troubleshooting I checked the temp sensor inside of the air gun. Turned out the ground wire coming from outer shield of the gun (it was attached somewhat sloppily) was shorted with the metal part of the sensor (it was not insulated properly) and tripped something inside of the station. I believe I have read of a this issue with other soldering station while doing my research before deciding. If this flaw is resolved I would definitely keep this one.
nate
Reviewed in the United States on January 2, 2020
Compact and does all that i expected. The accessory tools that came with it were also nice. In the past two days, I've replaced bad charging ports on two kindle fires and repaired 2 broken Xbox controllers and fixed a broken floor lamp using it. Those things alone easily justify the cost of this unit.
Recommended Products
$31.32
$ 13 .57 $13.57